How to cut a bottle? The main ways of cutting glass and a master class for creating stylish crafts from bottles (75 photos). Master class: how to cut a bottle with a thread - it's simple! Cut the bottle with thread

Why throw away glass bottles when you can make delicious ones out of them. decor elements that will look chic in any interior? If you think that cutting a bottle is very difficult and even dangerous, you are mistaken. There are a few easy ways to help you do this safely so you can create your own little masterpiece.

How to cut a glass bottle

This video shows 2 ways to cut glass. One of them uses glass cutter, and for the other you only need hot and cold water!

By cutting the bottle into 2 parts, you can make anything from it: from a candlestick or a glass to a hanger for outerwear. The main thing is to have a rich imagination!

PRODUCTS FROM GLASS BOTTLES

1. You can make such cute vases from wine bottles.

2. Or shovels for cereals.

3. And even creative glasses!

Use this advice to add originality to your interior and make it unique. These unique items will definitely decorate your home!

Having collected several wine bottles at home after the celebration, I decided to use them somehow. After looking at ideas from the Internet, I ran into the problem of how to cut the bottle myself?

4 ways to cut a glass bottle

Make an incision on the bottle. Use a glass cutter or glass drill to make a cut that will break your bottle. If you want, you can use some kind of bottle clamp to make a straight line around the bottle.

Warm up the bottle. Heat up the cut you made with the glass cutter. For heating, you can use a small candle or a butane lighter. Aim the flame directly at the cut line and constantly rotate the bottle so that the heating is even.

Dip the bottle in cold water. When you have spent about 5 minutes warming up the bottle, then dip the part of the bottle you want to cut into cold water. Do this in a sink or basin of cold water.

Repeat the process. For the desired result, your bottle may require more than one heating and cooling procedure. Simply repeat the process of heating the bottle and submerging it in cold water until the desired part breaks off.

Clean up the edges. Use coarse sandpaper to clean up the chipped edges. Once you've removed all the rough edges, use a lighter grit paper. Clean the edges immediately, do not delay, otherwise you will cut yourself.

Enjoy your creation. Use your bottle to hold your pens instead of a glass, or make a pretty vase out of it. The options are endless!

Cutting your bottle with boiling water

Draw a notch line on the bottle. Make a line on the bottle where you want to cut. Use a glass cutter or glass drill to make one even cut around the bottle. Do not overlap the notch line, otherwise the chip will be uneven.

Prepare water. You will need a sink with cold running water, as well as a kettle with boiling water.

Pour boiling water over the bottle. Hold the bottle over the sink and slowly pour hot water from the kettle over the incision line. Pour the water evenly, do not go beyond the edges of the incision.

Run your bottle under cold running water. As soon as you finish watering the incision with hot water, then start pouring cold water over it. The first time you do this, your bottle will most likely not break.

Continue pouring hot and cold water into the bottle. Remove the bottle from the cold water jet and start pouring boiling water over the incision. Pour the entire cut line around the entire bottle, and then slip it back under cold water. After the second or third attempt, the bottle should break along the notch line.

Clean up the edges. Use coarse sandpaper to smooth out chips. When the edges are even, you can use fine sandpaper to make the edges smoother.

Cutting a bottle with thread for yarn

Wrap the bottle with yarn. If you do not have such threads on hand, then you can use any thick cotton cord. In the place where you would like to cut the bottle, wrap the thread for yarn 3-5 times. Tie the ends together and cut off the excess thread.

Soak the thread in acetone. Remove the yarn from the bottle and place it in a small container. Start pouring nail polish remover or acetone onto the yarn until it is completely wet.

Wrap the thread around the bottle again. Take a string and wrap it around the bottle where you want the bottle to break. The loops of yarn should fit snugly together so that you get an even cut.

Light the thread. Use matches or a lighter to light the thread. Slowly turn the bottle so that the yarn burns evenly around the bottle.

Submerge the bottle in cold water. Pour cold water into the sink or basin beforehand. Wait for the fire on the yarn to burn out and then stick the end of the yarn bottle straight into the water. The bottle should split where the yarn was wrapped around it.

Clean up the edges. Use coarse sandpaper to smooth out the sharp, jagged edges on the broken part of the bottle. After removing sharp corners, use fine sandpaper to get a smooth edge on the bottle. Ready!

Cutting a bottle with a dremel

Prepare your bottle. All the cutting work here will be done by your dremel, but you need to know where to cut. Take two strips of duct tape and stick them around the bottle where you want to cut it, very close together but not touching. So you will have a notch line.

Cut the bottle. Insert the glass cutter attachment into your dremel and start to slowly cut the bottle along the line between the strips. You may need to go over the same spot multiple times to get a clean cut.

Clean up the edges. When the bottle splits along the line, the chip will likely have jagged edges that need to be smoothed out. Use coarse sandpaper to smooth out the sharp pieces, and then use fine sandpaper. Ready!

You can order a special tool for cutting wine bottles online if you don't like the methods above.
The temperature of the bottle glass should change gradually, except when you place the bottle in cold water. Otherwise, you will ruin the bottle.

Sometimes you come across just super ideas for design, someone offers a table made of solid wood, someone has shelves made of branches and you have not only desire, but also free time, but ...

To make even the most primitive shelf, you need good (not all from the store for 35 rubles) screwdrivers, corners, “screws” of the right length, be able to cut smoothly, like the saw itself, plus a drill, or even better if the wall is made of concrete. And in the picture everything is just drop dead simple and beautiful!

And if a shelf with some kind of decor? As here:

"Sticks are thrown around at every step." This is partly true, but they are either too thin or too thick or too dry or too rotten. But even if there are ideal sticks in front of the threshold of your door, then you need to remove the bark, at least somehow sand it, and ideally varnish it, otherwise the sticks will quickly darken and age.

And that's just, it seems that they are easy to attach. But what? Drill? Do you have a long thin drill? What about a self-tapping screw that long?

We look forward to creative success from you!

Hello dear readers! The decor of glass bottles has been quite popular lately, by the way, we have already considered this topic in the review "", and since many are interested in the question of how to cut a glass bottle at home, without using a glass cutter, I want to dedicate today's master class in a simple but interesting way, cutting bottles with a thread ...

In this connection, the topic of this master class is “How to cut a bottle with a thread - nothing complicated!”.

For work we need:

Glass bottle;
Woolen threads;
Solvent (you can kerosene, alcohol, cologne, acetone);
Scissors or stationery knife;
Gloves (will protect the skin of the hands from exposure to the solvent);
Lighter or matches;
To protect the eyes, just in case, goggles (in fact, there are no fragments, but caution is never superfluous);
Deep basin filled with cold water.

So, how to cut a bottle with a thread? We take a woolen thread, measure and cut it in such a way that it is enough for 3-4 turns of the bottle.

We immerse the measured and cut thread in the solvent, and immediately wrap the bottle in the place where it is planned to make an “incision”. You can simply wrap the thread or tie it in a knot, in this master class I just wrapped it.

After that, we set fire to this thread with matches or a lighter, and it is better to keep the bottle in an inclined position - strictly horizontally (parallel to the ground), gently scrolling around the axis.

The fire will burn for about 30-40 seconds, as soon as the lit thread goes out - quickly lower the bottle into the prepared basin filled with cold water.

Next, the characteristic sound of cracked glass will be heard, and the bottle will instantly split into two parts. This type of glass cutting is based on a rapid change in temperature, we all know from the lessons of physics that glass expands when heated, and narrows when cooled, respectively, with a sharp change in temperature, a kind of destruction of glass occurs and it simply cracks!

Everyone is well aware that when going on a hiking trip (hiking, water, equestrian) in sparsely populated places, we always forget to take some important trifle with us, but ... if you get lost in the forest, be sure to read. But it is also well known that for our tourist this is not a reason for discouragement. Because in such cases, he is almost always rescued -

Here, let's say you took with you a very sufficient supply of glass bottles with different contents, but forgot to grab mugs and glasses. They didn't even take a glass! A civilized western tourist would consider that the event is hopelessly spoiled and should be returned. But not you, because you are our tourist, and you have no doubt: something from the field of handicrafts will save you. Carefully examining the empty bottle, which you hold by the middle part, you notice that the bottom of the bottle is in the shape of a glass, and the top is in the shape of an overturned glass. And that's it, problem solved! Further - a matter of technology: it remains only to cut off the bottle in the middle. It is clear that a glass cutter is not taken on a hike, but you remember the trick you once saw with cutting off a glass bottle with a thread. And the focus was as follows. The bottle was tied with a thread soaked in kerosene, the thread was set on fire, and when it burned out, the bottle was abruptly immersed in cold water. Here it cracked just along the line of burning of the thread, and it only remained to carefully separate the halves of the bottle.

And so, the disclosure of focus - bottle cutting(from the heading "handmade crafts")

Without delay, we get down to business. Starting with preparation necessary materials and tools. This is:

- Glass bottle;

- a long strong thread;

- kerosene or lighter fluid (or other combustible liquid);

- a bowl of cold water (or a pond on the bank of which you made a halt);

- matches or a lighter;

- a tablespoon for tapping on the bottle;

- protective glasses;

- a brick or stone with a rough surface to remove sharp notches on the cut (it’s very good if a small file, a whetstone or sandpaper is accidentally lying around in the bushes - zero).

Then we go to main procedure .

1. Having cut the thread of the desired length (2-3 turns around the bottle plus tying a knot), soak it for a couple of minutes in a flammable liquid.

2. Very carefully, trying not to smear the flammable liquid on the glass outside the cut line, tightly tie the thread in 2-3 turns around the bottle along the intended cut line. At the same time, make sure that the strip of thread is of the minimum width, and that the knot is also of the minimum size. This will ensure a straight cut edge.

3. Put on safety glasses. Holding the bottle horizontally above the basin or above the surface of the reservoir at a safe distance from the face, set fire to the thread and slowly turn the bottle around its axis. This is so that the thread burns, if possible, simultaneously along the entire circumference. Let the thread burn out completely - until it burns out completely by itself.

4. Then immediately dip the whole bottle into cold water, holding it with your hands by the bottom and by the neck. As a result of a sharp change in temperature, the glass will crack exactly along the line of combustion of the thread (which is why the layer of thread on the bottle must be narrow).

5. If the glass does not break by itself, then you gently tap the working part of the spoon (which is on the side of the mouth) along the cracking line of the glass (the spoon should be at hand so as not to miss the moment). After that, the bottle is divided into a glass and a glass.

6. Smooth out any protrusions on the edges of the cut parts with a brick, file, etc. Of course, do this in the water so that small fragments of glass and brick do not scatter in the wind, aiming at the eyes. At least the glass should be sufficiently wet. Having finished grinding the edges, you get a wonderful glass and a pretty glass for use. Just do not forget to plug the bottom of the glass with a cork (that is, the neck of the former bottle).

7. Hand crafts using fire require compliance with fire safety requirements. Therefore, make sure before starting the entire procedure described that you have everything you need in case of a small fire. Water is at your fingertips, it remains to have some kind of dense cover just in case. And, more importantly, you start the operation only after you are completely sober, otherwise you can neglect fire safety and burn something you need.

When you learn how to cut a glass bottle well with a thread, you can use this skill to make other handmade crafts from bottles to decorate your home. It can be a flower vase, a table lamp, a champagne flute. At home, you will even have a diamond-coated file for grinding the cut line, not to mention fine sandpaper. You can cut the bottle not only parallel to the bottom, but also at any angle. The cut line can be pre-drawn using an elastic band for money and a felt-tip pen.

Useful articles

Workshop on cutting a bottle with a thread

Everyone is well aware that many useful and original things can be made from unnecessary glass bottles with your own hands. However, not everyone knows how easy it is, because many have no idea how to cut off part of the bottle without a glass cutter. We offer you a master class on how to cut a glass bottle with a regular thread quickly and easily at home without using a special tool.

In order to cut a glass bottle we need:

A piece of ordinary cotton thread.
Acetone or alcohol.
Cold water container.
Matches or lighter.

Thread cutting order

Step 1

Cotton thread soaked in acetone

We mark with a marker the line along which you want to cut the bottle. Wet the thread in acetone and wind it several times along the intended line. We tie the rope and cut off its ends.

Tie the thread tightly

Trim the ends of the thread

Step 2

Holding the bottle in a horizontal position over a container of water, set fire to the thread. In this case, the bottle must be rotated to ensure uniform heating.

We set fire to the thread

Step 3

As soon as the thread burns out, immediately dip the bottle into a container of cold water. From a sharp temperature drop, the glass itself will crack along the line where the rope was.

Dip the bottle in very cold water

Step 4

Separate the two parts of the bottle with your hands

At the last stage, it remains only to process the edge with an emery or file. Further, from the resulting glass, you can make an original candlestick or a flower vase, decorating the product to your own taste, in general, experiment!