If the gander flows in the bathroom. Installation and repair of a bathroom faucet with a shower

If for some reason - breakage, wear, change of design, it is necessary to replace the faucet in the bathroom or kitchen, then for the owner this case should not become an unexpected and extraordinary event. Replacing a faucet yourself is a simple job that requires only care and the right tool. For a home craftsman, such work takes a maximum of 1.5 hours, not counting the time for choosing and acquiring the necessary plumbing fixture in the distribution network.

Peculiarities

Any plumbing equipment of the apartment is included in the system of plumbing and plumbing communications common to the house or area. Therefore, you need to remember the responsibility for errors when repairing or replacing this equipment yourself. They can lead to damage to the property of neighbors and the management company as a result of flooding, fire or other incidents that have arisen due to the negligent attitude of the perpetrator of the accident to their actions. All this can be avoided if you carefully consider the entire process of replacing the mixer before starting work.

Before starting the repair or replacement of water fittings (valves, valves, faucets, mixers) and devices for their connection to pipelines, it is necessary to completely turn off the water supply to the repaired area. To do this, shut-off valves are closed at the input of pipelines to a house or apartment (experts call such valves primary valves or primary valves).

Replacing or repairing a mixer requires disconnecting two water supply pipelines - cold and hot water. In addition to shutting off the pipelines, it is necessary to verify the density of the primary fittings by opening all the valves in the disconnected section for inspection: the cessation of leakage from the valves confirms the absence of gaps in the primary valves.

Preliminary measures are necessary to ensure complete safety of operation. If it turns out that the primary valves in the "closed" position pass water in large quantities, then permission should be obtained to turn off the valves to the entrance or even at the entrance to the entire house. Permission can be obtained from the Management Company, where you need to write an application indicating the date and time of the proposed repair.

The management company must send its employees to the operation of disconnecting and subsequent connecting the pipelines.

Kinds

To replace an unusable or unpresentable mixer, you must first purchase a new one. On sale there is a huge number of faucets for bathtubs and sinks of domestic and foreign manufacturers, of any color, style and material of manufacture.

The arrangement of modern bathrooms involves the installation of faucets of two functional types in several versions.

• Two separate faucets: one is installed above the bowl of the sink, the other is for filling the bath and shower. These devices are completely different in design and function. Above the sink is a regular faucet for washing. The faucet above the bath has a flow direction switch for the shower or for a gander to draw water.
• One faucet that performs three functions at once: a washbasin above the sink, a device for collecting water in the bathroom and a shower. The same type of mixing valve is used as in the first version (with a water flow direction switch).

For a sink, conventional faucets with two valves (one valve for starting cold and the other for hot water) or faucets with one lever are more often used. Cranes with a lever are also called single-lever. The device named mixers are not the same. They also differ in ease of use: to regulate the pressure and temperature of the water through a single-lever tap, it is enough to control with one hand. In a two-valve faucet, sometimes two hands are not enough.

Familiar to everyone when visiting public places (theaters, cinemas, restaurants, cafes, stations), touchless faucets are not only a new type of sanitary comfort based on the principles of automation and electronics, but also quite hygienic and economical devices.

By setting them to a certain water supply temperature suitable for all family members, they are no longer touched with dirty or soapy hands.

There are no problems with forgetting to turn off the tap - the sensor, in the absence of a “washing object”, will block the flow of water. But it is problematic to repair such faucets at home due to the complexity of the sensor system, and in terms of user experience, they are only suitable for installation above the washbasin in the bathroom. In other places, they are completely inappropriate: it is possible to get a bathroom only by constantly keeping your hands under the tap, and in the kitchen they are inconvenient in terms of frequent changes in water temperature when washing and rinsing dishes.

Single-lever mixers also have a significant drawback - they have built-in either ball or cartridge locking mechanisms, which are very demanding on the purity of water. In the conditions of old water supply networks that are not equipped with modern cleaning equipment, ceramic parts of taps quickly fail. Parts are not subject to repair, they can only be replaced with a new locking mechanism. But such work can be done in 20 minutes without resorting to the services of plumbers. In this case, the set of the right tool is more important.

Causes of failure

The main reasons for the complete replacement of mixing taps in the kitchen and bathroom are their frequent leaks or blockages, wear of the switching mechanisms in the shower-spout system, cracks in the body, broken fasteners, as well as a change in the design of the rooms where these taps are installed. It is necessary to understand and determine exactly why breakdowns occur. This is especially important for those who are satisfied with the existing mixers, and extra costs are not included in the plans.

Often, some of these causes can be corrected without replacing the entire faucet.

Leaks in two-valve types of faucets come from the mixer goose and from under the faucet flywheel.

• From the goose of the mixer. There may be one of two reasons, or both. The first is the passage of valve gaskets due to violation of their integrity, wear, hardening or deformation. Violation of integrity can occur as a result of exposure to the gasket of the sharp edges of the valve seat. The second is seat and valve wear, which occurs most often in valves with a long service life as a result of corrosion and mechanical (rubbing) action of water.
• From under the flywheel of the crane. Blame it on: flywheel stem seal or valve gasket. A bad flywheel seal is caused by a loose or deformed O-ring. The reason for skipping the gasket is that it fell off the pin.

Ball or cartridge mixers leak when grains of sand or other debris get into the valve mechanism (between the ball and its seat in ball mixers, and between the discs of the cartridge type valve). Even when the taps are tightly closed, water will ooze through the resulting gap between the working parts of the valves.

In faucets with a shower, in addition to the listed malfunctions for the same types of mixers, other leaks are possible.

• When you turn on the faucet, water flows through both the gander and the shower. The reason lies in the switch. Depending on the type of mechanism, these can be: lack of water pressure for tight switching of the “shower-spout” system in push-button types of switches with a metal valve, wear of guide parts in switches with an eccentric and barrel, breakage due to sand ingress of plates and clamps into ball switches, wear of gaskets in spool devices.
• Leakage through the button of the pushbuttons as a result of a damaged O-ring.

The reason for the decrease in the flow of water at the outlet of mixers of any type is most often the clogging of a special device installed at the end of the gander, called an aerator. It is polluted due to the high hardness of raw water, the salt deposits of which clog the aerator mesh and the holes of the shower head. Litter and scale in the water pipes can cause clogging of the faucets themselves, which will also affect the power of the jet at the outlet of the tap. All these malfunctions do not require a complete replacement of taps and are easily fixed at home.

Breakdowns in the form of cracks and fistulas in valve bodies, breakage of fasteners made together with crane bodies require replacement with serviceable devices. Contactless faucets, although they have a long service life, are subject to the same malfunctions as everyone else: they become clogged from dirty water, the internal shutter mechanisms wear out, and the aerator screens become clogged. But in addition to this, sensors and photocells responsible for turning on the water when hands approach the tap spout may fail. Such a malfunction can only be mastered by a specialist who understands electronics.

Required Tools

When replacing mixing water taps, a small set of tools is required, which a person who knows how to solve economic problems on his own will always have.

Here is a list of tools that may be needed during the dismantling and installation of various types of cranes (without repair):

• a medium-sized adjustable wrench or gas wrench (it is ideal to have a clamping wrench for this);
• open-end wrenches for 10, 11, 12, 13, 14, 22 and 24 mm (rarely - a key for 27);
• socket tubular wrench 10 mm;
• pliers;
• scissors;
• thin flat screwdriver;
• Phillips screwdriver;
• bucket (basin) for draining water.

In addition to the tool, you will need consumables:

• tape for sealing fittings (thread seal);
• liquid sealant;
• insulating tape.

Connecting water hoses will definitely need to be replaced with new ones. New taps are delivered to the distribution network complete with hoses, but their length does not always correspond to the actual length at the installation site. Therefore, it is recommended to measure the length of old hoses and purchase the same ones. The standard length of hoses supplied with taps is 30 cm.

How to remove and disassemble?

Before installing a new faucet, it is necessary to dismantle the old plumbing fixture. The easiest way to remove the bath faucet, as it is removed entirely by unscrewing the two union nuts connecting it to the hot and cold water supply pipes. The only difficulty may arise in the case of pipelines made of polymers. Loosening the nuts will require a lot of force, so you need to hold the underwater pipes to prevent them from twisting and breaking. You can hold the pipes with a gas or clamping wrench for the metal fastening tips soldered into them.

It is not possible to remove sink mixers so quickly, the work is often associated with the difficulty of access to dismantling places, and sometimes requires the removal of the bowl.

Most modern sink faucets will remove correctly in the following order.

• The water pipelines are turned off by the primary shut-off valve on the inlet manifold of the apartment or house.
• Valves are opened both at the place of work and in other places to remove pressure from disconnected sections. Under the open dismantled tap, if necessary, you can substitute a bucket to collect the remaining liquid on the supply lines of hot and cold water.
• After making sure that all the water from the pipes at the level of the taps has come down, you can begin to work on removing the sink faucet. To do this, you have to climb under the bowl, spreading something so as not to get dirty. It is better to disconnect the sewer pipes and the siphon - it will be more convenient to deal with the tap. To collect possible liquid residues in detachable sewer devices, it is good to use a bucket or basin.
• Unscrew flexible wires from hot and cold water pipes. There is still water in the hoses and pipes at the lower level, it does not hurt to substitute dishes to collect it. At this stage, you need a 22x24 adjustable wrench or open-end wrench.
• Immediately with a suitable tool (knife, screwdriver), you need to clean the fittings of the supply pipes from the remnants of the old sealant, if any.
• The next operation is the most difficult, especially if the valve has been installed for a long time. The lower fixture of the crane has two long steel pins with nuts screwed onto them. From moisture, the nuts become tightly stuck to the pins, and sometimes it is impossible to unscrew them. To facilitate the task, it is recommended to lubricate the entire thread of the pins and the places where they come into contact with the nuts with kerosene or a special solution sold in hardware stores, and allow a little time to soak the scaling of the joints. After that, unscrew the nuts completely with a tubular wrench for 10 (a box wrench is also suitable).
• Now it's time to get up off the floor from under the sink. Pulling the faucet out as far as possible, unscrew the flexible pipes from the inlets in the lower part of the faucet body. This can be done with pliers.
• Pull up the entire faucet. This cannot be done before unscrewing the hoses - the lower mounting plate interferes, through the holes of which the nuts of the flexible hoses connecting the hoses to the pipelines do not pass.
• To clean the installation site of the mixer on the sink from dirt, not only from above, but also from below, under the sink.

It is recommended that the removed cranes not be thrown away, but disassembled for spare parts. No one knows when gaskets, fasteners, valves and a crane box may be required. Even if they are old. Sometimes you may need an ordinary lamb, but it will not be at hand.

The handle (lever) of the crane or the flywheel is removed after unscrewing the screw with screwdrivers. The screws are located under the decorative caps, which you just need to pry with a knife or a flat screwdriver. Having removed the flywheel or lever, unscrew the top cover of the valve mixer housing or remove the cartridge with cassettes and disks in ball valves. Other spare parts are easily removed from the valve body: valves, gaskets, crown (faucet box). All this can be very useful in the future.

How to change a faucet?

The new crane is installed in place in the reverse order of dismantling. Usually mixers are delivered in assembled form. Only in the device of the "shower-spout" system, installed above the bath, the shower column hose fits into a separate package. It is connected after the installation of the crane to the supply pipes - it is more convenient to work. But it is necessary to check the devices for the operation of the valves and the hermetic reliability of all connecting parts.

Installation of faucets for the kitchen and washbasin in the bathroom is done by hand, without the involvement of professionals. You just need to strictly follow the following step-by-step instructions.

• Screw the flexible hoses to the body. They must first be sequentially passed through the special holes in the rubber seal and the mounting plate with the narrow connecting end of the liner (without nuts) forward, and then inserted from below into the mounting hole of the sink shelf. To do this, you have to climb under the sink.
• Securely screw the flexible wires into the faucet body.
• Place the gasket and fixing plate on the pins at the bottom of the hole (work under the sink) and tighten them with nuts.
• Connect the free ends of the flexible connections to the hot and cold water pipelines, wrapping a sealing tape around the threads of the adapters for reliability. Make sure shims are inserted into flexible hose nuts. If not, then they should be included. With synthetic pipelines, it is not necessary to use excessive force to tighten the nuts.
• Correctly place the tap in the installation hole of the sink, evenly distributing the top seal around the circumference, and tighten the fixing nuts under the sink.
• Pressurize the system by supplying water to the mixer, having previously closed the control valves that were opened before starting work.
• If the bowl is removed to gain access to the faucet fittings, it must be reinstalled after tightening the faucet fasteners before connecting the flexible hoses to the pipelines. That is, point 3 of the step-by-step instructions is replaced by point 5, after which you need to hang the bowl on its mounting bolts.

A mixer is an indispensable thing in everyday life, which greatly simplifies getting a jet of water at a temperature comfortable for a person.

Just imagine that in our technological age, some countries, for example, England, still use 2 separate taps for hot and cold water. We have long been accustomed to the widespread distribution of mixers, in the body of which a hot and cold stream is mixed, as a result of which we receive warm water.

Today we will find out what a gander for a bathroom faucet is, how to choose it, how to repair it, and also replace it with our own hands in case of a breakdown.

Varieties

The gooseneck is the curved spout of a bathroom faucet, from which water flows, mixed inside the body of this device until the optimum temperature is obtained. A more correct name for this element is the term "spout".

Ganders for bathrooms differ in length, they often have different diameters and devices. For convenience, they can be classified according to the following criteria:

Note! The faucet in the bathroom is used most intensively, so water often leaks from the gander. Most often, the cause can be solved on your own, if you remove the damaged spout, select a new one with the required length and diameter, and then screw it into place to the mixer, not forgetting the seal.

How to choose a new spout?

So, you noticed that the faucet in the bathroom is leaking. To eliminate leaks and water overruns, most often a gander needs to be replaced. If the mixer needs repair, then you first need to choose the right spout to replace the failed one. When buying this part, you need to pay attention to the following aspects:

Important! Experienced plumbers say that in everyday life it is more convenient to use a faucet with a swivel spout. However, as practice shows, it is at the point of rotation on the taps that water flows. If you are thinking about a swivel gander, then before starting installation, take care of a high-quality seal for the connecting nodes of the device so that the leak does not take you by surprise.

Repair and replacement

If the gander of the mixer in the bathroom flows, then it must be urgently replaced. If water began to leak even in a small trickle, but constantly, then its consumption will increase, and hence the cost of utilities. Do-it-yourself repair of a gander faucet in the bathroom is a task that even an inexperienced master can handle.

To do this, follow the following instructions:

Please note that when tightening the nut when replacing a shower spout or sink, you can damage the chrome on it with an adjustable wrench. In places of damage, corrosion will appear, which can spread along the entire length of the product, causing then leakage. To avoid this, it is necessary to wrap the ends of the key with a soft, but not slippery material, such as rubber.

Video instruction

sovety-vannoy.ru

What is a goose

Nut wear

Aerator pollution

Gander repair

Installation steps:

1. Apply a coat of lubricant on top.

Cleaning / replacing the aerator

Cleaning steps:

1. Screw the aerator to the gander.

Aerator replacement:

1. Spin it.

Switch repair

Suberic

Button

Barrel switch

Ceramic

Additional Information

www.vannayaa.ru

Install the gander on the mixer

The faucet is a plumbing fixture that almost no bathroom or kitchen can do without. You can find out how to change it correctly or how to install a gander on a mixer from our article.

As practice shows, the old device sooner or later becomes unusable and the question arises - how is it replaced? To resort to the services of specialists who take quite decent money, or do all the work yourself? Installation of this device does not require special skills and is quite within the power of every person.

For this reason, you should not invite someone, but make a replacement yourself. This way you can save money that is better spent on other purposes.

Choosing a bathroom faucet

It is highly not recommended to buy a Chinese-made device, because, as practice shows, its service life is short. You can choose mixers imported or domestic production. Russian manufacturers create devices based on the features of not quite high-quality water. The device should be made of brass, preferably stainless steel.

Based on practice, plumbing fixtures should be thick-walled, which means they should have a fairly decent weight. This is the most important difference from Chinese products. When purchasing a mixer, you need to pay attention to the union inlet nuts, they must be thick-walled. Today, devices with ball and valve type valves are produced. The latter is much more convenient to regulate water than ball valves.

Mixer kit

Before replacing the mixer, you should carefully check the entire package. Components:

• Fitting-holder of a watering can for a shower.

• Main block or stem with inlet union nuts, taps or valves.

• Shower head.

• Flexible shower hose.

• Silicone or rubber gaskets in union nuts, including rubber rings on the gooseneck.

It is advisable to take the gaskets in reserve, as the kit may contain poor-quality nuts or they may be damaged when installing the device.

Faucet replacement: how the gander and other components are installed on the mixer

The work of installing new plumbing equipment is not difficult, but it requires great care, for this reason it should be approached with all responsibility. First you need to prepare the unit, all the required materials and tools:

1. Open-end wrench 13x14.
2. Gas wrench No. 1 or adjustable up to 30.
3. Construction level for mounting the horizontal position of the device.
4. Fum tape or linen thread "Unilok".
5. Mixer.

Dismantling work with an old mixer

First, the valves for hot and cold water or inlet taps in the apartment are closed. The gas wrench from the device loosens and unscrews the union nuts of the shower head hose.

Due to the adjustable wrench, the union nuts of the mixer are loosened, after which it is removed. With a key of 14, the eccentrics are unscrewed and removed to the side. The remnants of the sealant are removed from the threads of sockets or fittings. The quality of the thread in the sockets that are installed on the bar is visually checked, and, if necessary, they are replaced with new ones. If this is not done, the threaded connection will simply leak, and all the work will have to be redone.

Mixer connection options

There are several ways to connect these plumbing devices, depending on the water supply to the kitchen or bathroom:

• When the external wiring of the water supply and sockets for mixers is installed on a special bar.

• When there is a hidden water supply in the room and several fittings for hot and cold water come out of the wall.

Both in the first and in the second version, the device can be installed on eccentrics, and with the second, the connections are connected directly to the pipes. Accordingly, the mixer should be taken with an internal connection.

Installation of new equipment

Now you need to consider how the faucet in the bathroom is replaced. The Unilok thread is wound on new eccentrics and twisted into rosettes. Everything is tightened with a 14 wrench. Work must be carried out so that the external thread of the eccentrics is horizontal.

Everything is controlled visually or at the expense of the building level. Then decorative washers are installed. A sealing thread or tape is wound around the thread, the mixer is mounted and both union nuts are carefully screwed on by hand. It is necessary to check in advance the presence of sealing gaskets inside the nuts. They are screwed on smoothly without distortion, strictly along the thread. Everything is tightened with a wrench.

How to install the goose?

When the unit is attached, it is required to proceed with the final installation - the installation of a shower and a gander with a flexible hose. To begin with, a gander is put, but small nuances must be taken into account. From the side of the plumbing device, rubber sealing rings are mounted on the gander. It must be directed evenly and carefully, so as not to damage them, insert the gander all the way.

The union nut is screwed on and tightened with a wrench. For reliability, sealing tape or thread can be wound on the thread, but this is not necessary.

Now you can check the quality of the connections by opening the taps. When doing this, make sure that the switch flag is directed towards the gander.

Shower head installation

This is not the end of the instructions for replacing the faucet in the bathroom. When there is no doubt about the quality of the connections, you can proceed with the installation of a flexible shower hose.

The union nut of the hose is put on top of the threaded outlet, tightened as tightly as possible so as not to scratch the surface. And finally, a shower head is attached to the hose nut and tightened with a wrench. For reliability, you can wind the fum tape.

Expert advice

An eccentric is a threaded fitting, which has an offset center on several sides. It is needed for fine adjustment of the horizontal installation of the mixer.

A receptacle is a specialized angle fitting required for water supply with a flat sole, which has holes for mounting on a bar or wall.

Before assembly, it is advisable to make sure that the fitting-holder of the watering can is screwed to the mixer, since it will be difficult to do this later because of the wall.

The quality of the gaskets located in the union nuts should also be checked. They should not be scratched, torn or deformed. Silicone gaskets are better than rubber.

How to replace a device in a bathroom with a shower column

In the event that the plumbing is equipped with a panel or shower rack, then the replacement is done differently.

To begin with, the stand is disconnected. With an adjustable wrench, the rack connecting nuts are loosened and unscrewed. If it is connected by a flexible hose, it is enough to remove this hose. The rack mounts are unscrewed and removed. Then the mixer itself is dismantled, as described above. In the event that the rack is equipped with a flexible connection, and its replacement is not planned, then it is not necessary to remove it.

Shower column fixing

The rack is installed only after the mixer. Pressing it against the wall and simultaneously controlling its verticality by plumb line or level, holes are marked. If the rack has rigid fasteners, then the fastening nuts must be baited and only after that do the markings. Mounting holes are drilled.

Linen thread or fum tape is wound around the threads of the connecting nuts, and the rack is fixed on the wall. The final connecting nuts are tightened with a gas wrench. Water is turned on for testing.

You may also be interested in:

remontik.org

Gander for a faucet 40, 50 cm: do-it-yourself video installation instructions, what to do if it breaks, flows in the bathroom or in the kitchen, how to disassemble

Experts call this structural element a spout pipe, and it performs the function of directing a jet of water to the right place and spraying it to obtain a more uniform flow. If earlier products of this type were monotonous, then in our time you can even find a gander for a 50 cm mixer, this option is used where the bathtub and sink are located nearby.

We will consider the main design features, as well as figure out how to eliminate the main types of malfunctions that may occur during operation.

Main design features

On the market you can find a huge number of options that can vary significantly in their characteristics and method of execution. Let's take a look at the most important differences:

At the point of attachment	There are two options here, the first of them is mounting directly on the sink or sink, used for small structures, and the second is wall mounting, most often this solution is used in bathrooms. Naturally, the option of supplying communications also depends on the location, so consider this factor in advance.
Spout type	Often in kitchens and bathrooms, conventional stationary options are used. But more and more often, buyers are choosing a design with a retractable watering can for the kitchen, with its help, washing dishes and vegetables with fruits becomes much more convenient, but the price of such products differs very much from the standard ones.
By appointment	There are three main options here, the first one is products specifically designed for use in the kitchen, the second one is for bathroom use, and the third one is for sinks. Each of them has its own design features, so it is important to know at least the approximate parameters of the installed plumbing
By water supply	The first option - nodes with a lower location of the water supply, the second - with an upper one. Simply put, the gander can be mounted on top or bottom of the faucet, the first type is implemented in structures installed on sinks, the second - in wall-mounted systems
According to the shape of the element	Spouts can be of a wide variety of shapes, so you can choose the best solution for almost any design. Each of the options has its pros and cons, so you need to choose a specific solution only after consulting with a specialist.
To size	Another very important parameter to consider, especially if you do all the work yourself. There are four main groups: short for use in small sinks, medium for use in larger sinks and sinks, long for use in bathtubs, and extra long for use in multiple containers.

Important! Consider not only the length of the gander, but also its height, especially when installed in sinks in the kitchen. Washing dishes is much more convenient under a high spout, but too high a height causes splashes, which is also undesirable.

It should be noted right away that if you are equipping a shower cabin, then the best solution would be a faucet without a gooseneck, this option includes an adjusting handle and a rain hose.

If you need a classic version, then you will have to choose from a huge number of models. Let's take a look at what you should focus on.

Criterias of choice

In order to purchase the best option, you should consider several important points:

• Assembly and installation instructions must be in Russian. This indicates that the equipment is intended for the conditions of use in our country and was imported legally, with a quality check. Documentation should not contain errors, all schemes should be neat and understandable.
• The second important nuance is the installation location of the structure. As noted above, for kitchen sinks, the height of the spout, the radius of its spray, as well as the possibility of using it on 2 sinks are important (in this case, the option with a pull-out spout is an excellent solution). For bathrooms, the presence of rain, the length of the gander and the adjustment features are important.
• For ease of use, it is best to purchase products with a swivel gooseneck, they provide excellent functionality and practicality. For small sinks, a fixed design is also suitable, since there is no point in rotary systems.
• A very important factor is the material of manufacture, the strength and durability of the product directly depends on it. The best solution can be called brass with chrome plating, this option is characterized by high strength and durability. You should not purchase products made of powder alloys, due to their low strength, the situation when the gander at the mixer breaks down is not uncommon.

Advice! It is best to purchase products of well-known brands, the quality and reliability of which is confirmed by customer and specialist reviews. As a rule, the best products are made in Europe, in particular Italy and Germany, but other manufacturers produce reliable components, but it is better to choose products from the premium line.

• You should also pay attention to the quality of the protective layer and its type. This is important not only from an aesthetic point of view, but also from a practical point of view, because care for different types of coatings can vary significantly.

Trouble-shooting

If the mixer flows from under the gander, then first of all it is worth disassembling the system for inspection.

Consider how to disassemble the gander of the mixer:

• For classic models, first of all, it is necessary to unscrew the gooseneck nut. This element is present both in the upper and in the lower version of the location of the spout. First of all, try to do it with your hands, and if it doesn’t work out, use a plumbing key, the main thing is to do everything carefully so as not to scratch the surface.

• After removal, first of all, two rubber seal rings are inspected, it is because of them that the gander of the mixer in the bathroom and in the kitchen most often flows. They can be purchased at any plumbing store.
• If the rings are normal, inspect the plastic washer, wear may form on it, which will cause water to leak, it also needs to be replaced.
• But sometimes a leak is formed due to corrosion on the internal elements or the occurrence of cracks in the spout. In this case, the only solution to the problem is to replace the faucet gander - in the bathroom you can turn off the tap and use the rain, but in the kitchen, until you replace the unit, you will not be able to use water.

In lever systems, work is carried out a little differently:

• First, the handle is removed, for this the fixing screw is unscrewed.
• Next, the fixing washer is unscrewed and the cartridge is taken out, after which the gander can also be removed.
• On the inside of the element there are two o-rings, it is them that should be inspected. If everything is in order with the rings, but there are signs of corrosion on the inside, the element must be replaced. Assembly is carried out in reverse order.

Conclusion

Do not think that the spout is sold only complete with a mixer, if necessary, it can be purchased separately and replaced without outside help. Some important nuances on this issue, which you should also know about, will be discussed in the video in this article.

hydroguru.com

DIY bathroom faucet repair

In the rooms for taking water procedures there is sanitary equipment, the largest of which is a bath. It is installed once and for a long time. With proper care, it never fails, but mixers for it often have to be changed or repaired.

What is a goose

The gander is the spout of the mixer. With frequent use, it breaks down and wears out. To repair the gander, they call a plumber or try to do similar work with their own hands. But, before starting an independent installation of the structure, they first identify the cause of the problem.

Nut wear

The reason that water leaks from under the gander in the bathroom is the natural wear of the gasket at the point where the spout is attached to the faucet body. Fixing this problem is easy. To do this, you need an adjustable wrench and a new sealing gasket. When unscrewing the gooseneck nut, it is important to observe the pressure. Excessive loading leads to scratches on the metal surface.

The use of paronite gaskets increases the performance of the gander due to the absorption of liquid by it. Absorbing water, it completely fills the space inside the spout and prevents leakage.

Aerator pollution

On many models of faucets, an aerator is built into the end of the spout, which, by breaking the flow of water, creates a volumetric jet, saving its consumption. Sometimes it happens that the gander leaks because of it.

The occurrence of a leak is often due to the structural features of aerators. The smallest particles of pollution are collected on its nets, preventing the movement of water. As a result, the pressure inside the gander increases, and leaks appear. You can fix the problem by cleaning the aerator or replacing it.

Brass aerators are highly resistant to mechanical damage. In the future, when cleaning such models, the risk of damaging them with an adjustable wrench is minimal.

Spout/shower switch failure

Bathroom faucets often leak as a result of a broken spout/shower switch. The elimination of this malfunction depends on its type (cork, push-button, ceramic, with a barrel) and the nature of the breakdown.

Gander repair

If there are leaks in the spout, it is not always possible to change the mixer. Often, a well-carried out repair of a separate part allows you to avoid replacing the structure.

Since it is correct to remove and repair the gander for the faucet in the bathroom.

Replacing the seal

To change a part, you need an adjustable or open-end wrench, a new gasket, silicone grease or liquid soap, a piece of thick cloth.

Installation steps:

1. Unscrew the union nut connecting the spout to the body with an adjustable wrench. To prevent scratches on the surface, it is recommended to wrap it with a thick cloth.
2. With a slight effort of the hand, turn the gander and pull it out of the body.
3. Pry off the damaged gasket with a thin knife and pull it out.
4. Attach a new ring to this place.
5. Apply a coat of lubricant on top.
6. Install the gander and tighten by hand.
7. Wrap the nut with a cloth and finally tighten with an adjustable wrench.

With proper repair, the drain will not leak until the next wear of the sealing gasket.

Cleaning / replacing the aerator

If a faucet with an aerator is installed in the bathroom or kitchen, then sooner or later there will be a decrease in water pressure and leakage. This is due to its pollution. To restore the power of the jet, cleaning or a complete replacement of the part is carried out.

Cleaning steps:

1. Unscrew the aerator from the spout spout, after wrapping the part with a thick cloth or rubber (round models are removed manually, all others with an adjustable or open-end wrench).
2. Pull out the contaminated nets, sealing gasket and rinse them. In the presence of limescale, soak the parts in table vinegar or a solution of citric acid (if these products are not at hand, you can clean the nets manually with a needle). The fixed aerator can be cleaned by immersing it in a weak acid.
3. Reinstall the cleaned nets and gasket (replace the deformed one).
4. Screw the aerator to the gander.

It is advisable to clean the aerator prophylactically, before the formation of persistent limescale.

In cases of deformation of the surface of the aerator with an adjustable wrench or the impossibility of carrying out its complete cleaning, the part is replaced with a new one.

Aerator replacement:

1. Using a thick cloth, unscrew the old part with pliers.
2. In its place, install a new aerator.
3. Spin it.

When buying a new aerator, take into account the diameter of the gander. Available in 3/4" and 1/2" models.

Switch repair

A breakdown in the mode of switching water from a spout to a shower often provokes leaks. To eliminate them, repairs are needed, which directly depends on the type of switch.

Before starting the repair, close the water supply valves.

Suberic

First, unscrew the nut that connects the part to the body. Then lubricate it inside with silicone grease and install it in place. The nut is not tightened too much, otherwise it will be difficult to switch the mode.

Button

Often leaks are due to worn gaskets. To replace it, unwind the part and find out the size. Then buy and install a new one.

In rare cases, it happens that water flows from the gander and the shower at the same time. This means that the rubber valve responsible for distributing water flows has worn out. If it fails to replace it, then you will have to install a new mixer.

Barrel switch

Basically, the leakage of such switches is associated with the wear of the sealing gasket. To fix the problem, unscrew the switch and replace it. Sometimes designs of such a model do not transfer water from one mode to another when turning. In such cases, not only the gasket needs to be replaced, but also the bolts. In the event of a complete failure, the keg must be replaced entirely.

Ceramic

Such structures do not wear out. The occurrence of problems with them is due to contamination of the cartridges installed inside. This requires the usual replacement of the cartridge.

Additional Information

In order to avoid minor breakages and leaks, it is recommended to pay attention to the shape of the spout while still in the store. To make the right choice, you need to pay attention to the nuances:

• The spout is swivel and non-swivel. The stable is not affected by normal wear and tear.
• For a bath, it is recommended to choose a gander model with attachment to the bottom of the faucet body and buy spouts with an aerator that has edges. Round ones are hard to remove and clean.
• It is advisable to choose models from brass, and not from silumin (brass is several times heavier than silumin) and with a gander of such length that water enters directly into the drain hole.

www.vannayaa.ru

Gander for a mixer - the simplicity of products can be deceptive

A gander for a mixer is a structural element that serves to supply a water jet in the right direction. Today, manufacturers use different forms of these products, which allows you to use mixers as efficiently as possible.

Gander for the mixer - simplicity is deceptive

As already mentioned, ganders are divided into separate subspecies:

• Classic variant. It implies a product that has different heights with a bend. These models include faucets with a high spout, having a gander not only round, but also square and flat;

• Retractable (compact) model. In this case, the gooseneck tube is connected to a hose, which, if necessary, can be extended / retracted. Interestingly, the spout can look like a shower head. This type of faucet is popular in catering kitchens or installed on sinks that have two or more sinks.

It should be noted that the gander for the faucet in the kitchen is different from the models installed in the bathroom. In the kitchen, swivel ganders are mainly used - a stationary product will be impractical and inconvenient for the hostess, who in the kitchen not only washes dishes, but also cleans, cooks and does many other things. Moreover, this applies to sinks with two sinks, where you simply cannot do without a swivel gander.

The main difference between a kitchen gander and a bathroom is the power of the water pressure. Kitchen samples are attractive in that they hit with a tight, elastic jet exactly in the center of the drain - this is required so that the water entering the sink does not splash around.

An important role in the kitchen is also affected by the length of the spout - it should not be too short and at the same time too long. In the kitchen, after all, not only do they wash the dishes, but they also collect water in containers, clean and cook.

Now, with regard to the height of the kitchen structure - buying a faucet with a high spout, you run the risk of being constantly wet (water splashes in all directions). But too low a spout will cause a lot of problems - it will be extremely inconvenient to wash and fill large containers. Manufacturers have found a solution to the problem: many additional modules and accessories for faucets are produced, which are presented in the form of nozzles, spout extensions, etc.

Form matters

A gander for a faucet in the bathroom, like kitchen models, differs not only in length, height and water pressure, but also in its shape. Today, there are several basic configurations: C-, J-, G-, R- and S-shaped models. The body itself can also be of different shapes - square, flat or round.

The defining value of the shape of the spout is the location of the mixer:

• Wall-mounted mixers have C-, J- and L-shaped spouts;
• Faucets installed on the sink can have structural elements of any shape.

The modern world of plumbing has long erased all stereotypes associated with the shapes of faucets - now you can find models with switches for water supply, additional filters for drinking water, molded structures, etc.

Manufacturers have models that have one spout, but two types of water flow from it - filtered and domestic (and they do not mix).

Bathroom - design features of faucets

The gander for the faucet in the bathroom is almost identical to the kitchen models, but there are also cardinal differences. Many ordinary people naively believe that a model with an elongated spout is the most optimal and sought-after option. But this, unfortunately, is not the case.

Cast models that do not have a rotary mechanism are in the greatest demand among specialists. Such models are not afraid of increased loads and a constant start-up of water. Whereas rotary products very often begin to leak at the junction of the gander with the main structure and you have to call a plumber or repair the product yourself.

It is important to know! The length of the spout is selected according to the location of the mixer itself - if the spout is too short, then the water will hit the side of the bathroom and splash the entire room. Conclusion: the larger the side, the longer the spout should be.

In the case of a bathroom, most Russians choose the “classic” equipment - a faucet with a long gooseneck, equipped with a separate watering can and a switch. Its popularity is due to ease of use in our, domestic realities.

Now with regard to the type of fasteners. Bathroom products are as follows:

• Wall mounted;
• Models that are attached to the side of the bath;
• Designs installed on a special shelf;
• Stand faucets.

Bathroom spouts are no different from kitchen counterparts, although you can add faucets with a low and flexible goose to them. Often, in stores you can find combined variations in the most conceivable and unthinkable combinations.

As for wealthy people, they can afford any design. Even equipped with a touch screen that regulates the water temperature and pressure.

January 17, 2018

prosmesiteli.ru

Bathroom faucet gander

In any house or apartment there is at least one bathroom and a sink in the kitchen. In both of these rooms, a mixer is installed above the sink - a device for supplying water from the central water supply. One of the important components for the mixer is the gander, or spout.

What is a goose?

The gander is a curved metal tube where water is mixed to the desired temperature and enters the sink or bath. This detail is also cutely called a nose. Now on the market there are various types of gander for the faucet in the bathroom. The right choice will make the operation of the mixer optimally convenient.

Types of mixer ganders

One of the options for choosing a spout is its length. A long gander for a mixer reaches from 24 to 50 cm. A device of medium length is from 20 to 33 cm. Shortened models are a gander with a length of 15 and 18 cm. The length of the spout should be chosen taking into account the size of the sink in the bathroom. So, for example, a short gander will direct a stream of water not into the drain hole, but into the side, which is why splashing of water drops is ensured. It is for baths that it is advisable to give preference to universal models with a long gander. With it, it is easy to direct the flow of water in the direction of the bathtub or sink you need.

Height is also important when choosing a bathroom faucet. It is measured from the base of the faucet to the opening of the spout, from where water flows into the sink. For small and shallow shells, low ganders are chosen. Excessively high spout will result in splashing. At the same time, with a very low spout, the sink will be inconvenient to use.

In plumbing stores you can find all kinds of gander shapes: curved in the form of the letters C, S, G and J, straight. Also classic models are a tube, round, triangular or oval. Cascading products with a flat and wide bath spout have appeared on the market.

If the mixer gander is leaking

As the mixer is used, the consumer may notice that the gander is flowing at the attachment point with the body. The reason for this is most often the wear of the gaskets. To solve the problem, unscrew the spout with your hands or a wrench. You will see two rubber and one plastic spacers. It's easy to change them. In a specialized store, you should purchase similar ones and insert in place of the erased ones, pre-coated with grease. After that, the gander is carefully screwed to the mixer body. Now they can be used for their intended purpose.

The faucet is an essential element of every bathroom with hot and cold water supply. Thanks to him, the temperature of the water leaving the tap and its pressure are regulated. In addition, the mixer has a switch that allows you to redirect water from the tap to the shower. Like any mechanical device, the mixer is not immune from all sorts of breakdowns. Fortunately, its design is not too complicated, allowing, in most cases, to fix problems yourself. In the article, we will consider the device of a bathroom faucet with a shower, repair of a faucet in the event of any breakdowns, and list the causes of malfunctions.

Consider how it is arranged with a shower. This will help to understand the principle of its operation, depending on the design. All faucets that can be used in the bathroom are divided into 3 categories:

1. Touch. The control element of such a device is a photocell that gives a command to turn the device on and off. Self-repair of such devices is very difficult, so it would be most rational to refer it to specialists.

2. valve. The device of the bathroom faucet with a valve-type shower is quite simple:

• frame;
• spout;
• valves. Designed for manual control of the mixer;
• axle box crane. They control the flow of water. Older models are equipped with rubber gaskets, while new ones have ceramic plates.

In the photo, the design of a valve mixer with a flag switch

Tip: Ceramic bushings are much more durable than older models, and they are much easier to manage, since the valve rotates a maximum of 180 degrees.

3. Lever. Recently, this type of mixer is gaining popularity. A typical lever model consists of the following elements:

• frame;
• spout (gander);
• a ceramic or ball cartridge in which water is mixed. Ceramic cartridges cannot be disassembled. If such a cartridge has become unusable, the repair of a bathroom faucet with a shower will consist in replacing such a cartridge;
• control knob that regulates the pressure of water and its temperature. Mounted on the cartridge lever;
• a nut that fixes the cartridge in the housing;
• a housing cover that covers the cartridge and is designed to give the mixer a more aesthetic appearance.

The main causes of mixer failures

If you carefully study the device of the bathroom faucet with a shower, its repair will not be difficult. It is only important to know the causes of breakdowns:

• Unsatisfactory product quality. This is typical for products of little-known manufacturers who use low-quality components and consumables in their work;
• Use of old consumables. For example, paronite or silicone gaskets last much longer than rubber products. In addition, they are less deformed and do not collapse from drying out;
• Dirty water in pipes;
• Increased water hardness affects the internal parts of the device, provoking the formation of deposits and cracking of the seals.

Major breakdowns and their elimination

Let us analyze in more detail what breakdowns can occur during the operation of a faucet with a shower, as well as how to fix a faucet in the bathroom on your own. Faults may be of the following nature:

Leak at the junction of the gander with the mixer body

This is the most common failure, as the gander constantly rotates in different directions, which leads to wear of the rounded rubber pad. This gasket is located in the groove of the gooseneck, so the gooseneck must be disconnected to replace it.

Actions are performed in the following sequence:

• the fastening nut is unscrewed;
• gander is removed;
• the remnants of the old gasket are removed from the gander groove;
• a new gasket is installed;
• the goose is put in place;
• the thread on which the fixing nut will be screwed is wrapped with 2-3 layers of FUM tape;
• the gander fastening nut is tightened.

Leak from under the control lever

Such a failure is typical for single-lever mixers and is caused by a broken cartridge. The faucet needs to be disassembled and replace cartridge. In addition to this failure, there are several other signs of a cartridge failure:

• the lever became difficult to control;
• the temperature of the supplied water changes spontaneously;
• no supply of either hot or cold water;
• The valve does not close completely or does not open completely.

In this case, the cartridge needs to be replaced. Do-it-yourself bathroom faucet repair is carried out in the following order:

Important: There are protrusions on the cartridge body that must align with the recesses inside the body. Align them carefully. If they don't match, the mixer will leak.

Leaking valve of a two-valve mixer

The reason for the leakage of a two-valve mixer is the wear or destruction of the sealing washer located on the crane box. The destruction of the crane box itself may also occur. If the faucet in the bathroom is leaking - how to fix it quickly and inexpensively? Only on my own replacing the crane box or the washer on it. There is nothing difficult in this.

All work is carried out with the water supply turned off:

• the plug is removed from the leaking valve;
• the screw is unscrewed with which the valve is attached to the mixer body;
• with the help of an open-end or adjustable wrench, a crane box is unscrewed;
• the crane box itself or the sealing ring on it is replaced;
• a new or refurbished crane box is installed in the old place.

Faucet-shower switch leak

There is another gasket between the faucet-shower switch and the body, which can be damaged. How to fix a bathroom faucet whose switch is leaking? Just disassembling the switch itself:

• the button (switch) is removed, for which the stem is held in a fixed position with pliers;
• the valve with the stem is removed;
• the damaged seal is removed;
• in his place new seal installed;
• the switch is put together.

Repair of a faucet with a flag switch is shown in the video.

Malfunction of the button or valve "faucet-shower"

If the button does not return after being turned off, then its spring is faulty. It is necessary to disassemble the switch as described above, and then remove the broken spring. In her place new spring installed.

If the switch does not work, and water flows from the shower and from the tap at the same time, then the cause is cracked oil seal located on the switch stem. Necessary:

• remove the button (switch);
• remove the stem;
• replace the seal;
• assemble the switch.

Leak at shower hose connection

This problem occurs due to damage to the hose gasket. If the bath faucet is leaking, a do-it-yourself repair will consist in replacing this gasket. To do this, simply unscrew the hose nut by hand, and then remove the worn washer. In her place a new paronite washer is installed. Before tightening the nut, it is advisable to wrap a couple of layers of FUM tape on the thread. here.

Leak in the place where the watering can is connected to the hose

How to fix a faucet in the bathroom if there is a water leak at the junction of the hose and the shower head? Very simple. Under the nut located on the hose there is a round insulating gasket. It is easily replaced even without the use of tools.

Weak water pressure

If the water pressure through the mixer has noticeably weakened, while the neighbors have remained the same, one should suspect, first of all, aerator filter clogged located at the tip of the gander. You should unscrew it with your hand or pliers, and then check the pressure. If the pressure increased without an aerator, then the reason lay in its pollution. You need to gently rinse it under running water, and then screw it back into place.

Tip: It is often not the aerator itself that gets dirty, but the cleaning filter located at the entrance to the room. Therefore, if cleaning the aerator did nothing, then unscrew the filter and check the cleanliness of its mesh.

We found out how to repair a bathroom faucet with a shower with our own hands. If you use higher quality consumables, such problems will occur much less frequently.

Do-it-yourself bathroom faucet repair video

You will need

• - plumbing gander;
• - wrench;
• - ¾ inch O-ring;
• - fum tape;
• - rags.

Instruction

The goosenecks of water faucets differ from each other in properties such as shape, type and length. These parameters depend on the purpose of the mixer, but basically ganders are divided into two groups - solid and rotary. The first variety is a single unit with the mixer body itself and cannot be dismantled. The swivel version is bolted to the mixer and, in case of failure, can be detached and replaced with a new one.

For the work ahead, you will need a new goose of the desired shape and size, a ¾ inch diameter O-ring, fum tape and rags. You need to prepare an adjustable wrench, and in case of its absence, pliers will come in handy. Turn off the water to protect yourself and the room from unexpected situations.

The gander is attached to the mixer with a nut. It is screwed to a piece of pipe with a thread on the end, which is called a branch. When replacing an old gander with a new one, you must first unscrew this mount. For this, a wrench is used. Prepare a soft cloth in advance. Winding the nut with a rag will protect the chrome decorative coating from scratches and damage.

After the nut is unscrewed, you need to carefully remove the old gander and remove the worn gasket from the hole in which it was installed. A new gasket is put in its place. In this case, it must be ensured that there is no distortion and that it is tightly pressed against the pipe. At the end of the new gander, equipped with a thread, a little fum tape is wound and carefully inserted into the mixer body. Do not make this layer thick - this will prevent the free tightening of the nut and the tight connection of the parts. The clamping nut fixes the position of the gander. You should be very careful when tightening it - excessive use of force can cause it to burst.

Loosening the clamping nut can cause problems. Over the long months of use, limestone could form, which will serve as a serious obstacle when disconnecting the gander. In this case, you can try to destroy the formed deposits by lightly tapping on the nut. Even if the decorative coating is damaged, it will be possible to purchase a new mount. If this method does not lead to the desired result, you will have to buy special chemicals to destroy lime deposits. With their help, you can solve the problem without damaging the integrity of the chrome coating.

A mixer is an indispensable thing in everyday life, which greatly simplifies getting a jet of water at a temperature comfortable for a person.

Just imagine that in our technological age, some countries, for example, England, still use 2 separate taps for hot and cold water. We have long been accustomed to the widespread distribution of mixers, in the body of which a hot and cold stream is mixed, as a result of which we receive warm water.

Today we will find out what a gander for a bathroom faucet is, how to choose it, how to repair it, and also replace it with our own hands in case of a breakdown.

Varieties

The gooseneck is the curved spout of a bathroom faucet, from which water flows, mixed inside the body of this device until the optimum temperature is obtained. A more correct name for this element is the term "spout".

Ganders for bathrooms differ in length, they often have different diameters and devices. For convenience, they can be classified according to the following criteria:

Note! The faucet in the bathroom is used most intensively, so water often leaks from the gander. Most often, the cause can be solved on your own, if you remove the damaged spout, select a new one with the required length and diameter, and then screw it into place to the mixer, not forgetting the seal.

How to choose a new spout?

So, you noticed that the faucet in the bathroom is leaking. To eliminate leaks and water overruns, most often a gander needs to be replaced. If the mixer needs repair, then you first need to choose the right spout to replace the failed one. When buying this part, you need to pay attention to the following aspects:

Important! Experienced plumbers say that in everyday life it is more convenient to use a faucet with a swivel spout. However, as practice shows, it is at the point of rotation on the taps that water flows. If you are thinking about a swivel gander, then before starting installation, take care of a high-quality seal for the connecting nodes of the device so that the leak does not take you by surprise.

Repair and replacement

If the gander of the mixer in the bathroom flows, then it must be urgently replaced. If water began to leak even in a small trickle, but constantly, then its consumption will increase, and hence the cost of utilities. Do-it-yourself repair of a gander faucet in the bathroom is a task that even an inexperienced master can handle.

To do this, follow the following instructions:

Please note that when tightening the nut when replacing a shower spout or sink, you can damage the chrome on it with an adjustable wrench. In places of damage, corrosion will appear, which can spread along the entire length of the product, causing then leakage. To avoid this, it is necessary to wrap the ends of the key with a soft, but not slippery material, such as rubber.

Video instruction