Economical bathroom refurbishment. How to cheaply renovate a bathroom? Budget repair and saving rules without loss of quality

How to finish a bathroom cheaply is a relative concept. Depends on the financial condition and your personal wishes.

If you focus on the majority of the population living in apartment buildings, then you can pick up several, fairly budget options.

But first you need to consider ways to save money when performing finishing work.

Performing work on your own or attracting third-party hired specialists. Naturally, the implementation of a complex of works independently, will save a significant amount of money.

It is quite difficult to carve out finances on the wages of hired workers - the only option is to choose a specialist who has offered the lowest cost of his services.

Choice of finish. Rational planning and the use of modern materials can provide an opportunity to reduce the budget by tens of percent.

The use of the same type of finishing materials, differing in price. This method will reduce costs by 10 ... 20%, but there is a high probability of making a mistake with the choice of materials and running into a fake.

Conclusion: finishing a bathroom at minimal cost is possible when doing work on your own, from inexpensive materials, using a rational type of finish.

As an object of finishing work, bathrooms located in brick or panel houses (“Khrushchev”, “Brezhnevka”), as well as more modern buildings, consisting of 9 ... 14 floors with a typical layout that came from the Soviet era, will be considered.

Painting with paints and varnishes

This method is the most budgetary, low-cost in terms of materials and the amount of labor invested.

Preparation of the base, including the repair of the surface of the walls by applying plaster and putty. Treatment with antiseptic compounds.

Priming the surface with acrylic primers from the "aqua-stop" series - fasten the base structure and create a moisture-resistant film.

Applying a paint coating - you can use ordinary enamels based on pentaphthals (alkyd resins), the components of which create a smooth, moisture-resistant decorative coating on the base.

The disadvantage is that the pungent odor when dried will soar in the air for about two days. Another option is the use of acrylic enamels. They do not have a pungent smell and drying occurs within 1..3 hours. But the price is almost twice as high as compared to PF - enamels.

The junction of the bathtub with the walls is sealed using plastic elements or ceramic borders.

The price of finishing will be about 2000 ... 3000 rubles.

Wallpapering

For wet rooms, vinyl wallpapers with a moisture-resistant coating are used - “washable”. The surface of the walls, especially with uneven brick partitions, must be carefully leveled in order to make them flat.

The disadvantage of this type of finish is that moisture on the seams between the wallpaper sooner or later leads to peeling of the coating.

The use of a decorative finishing material based on fiberglass will help to avoid such a nuisance and significantly extend the service life.

Estimated costs 2000 ... 6000 rubles.

Covering with sheet panels

PVC (polyvinyl chloride) panel sheet size is 1 x 495 x 955 mm (thickness, width, length). Produced in a variety of colors and textures.

Under these products, a fairly flat surface is required, so leveling with plaster should be more thorough than with paint. Instead of painting operations, panels are glued.

The decorative material is fixed on the wall with glue from the "liquid" nails series, used in wet rooms and containing antiseptic additives against mold and fungus. Use of polyurethane mounting foam is possible. Panel processing is carried out with scissors or a clerical knife.

The cost of finishing works will be 4000 ... 6000 rubles.

Another budget option from the “how to finish a bathroom cheaply” series is the use of traditional plastic panels, which are board-shaped products.

The use of plastic panels

The plastic panel is made of PVC and structurally looks like a board with a width of 100 ... 500 mm, a length of 2600 ... 3000 mm. The section shows that between the two sheets there are stiffening ribs that give the product strength and lightness.

Fixing panels is carried out in several ways:

• Fastening on a wooden, metal or plastic crate by means of clamps, self-tapping screws or brackets from a furniture gun,
• Gluing on adhesive compositions from the "liquid" nails series

Mounting on polyurethane mounting foam.

In the latter case, you can omit the wall alignment procedure - this is due to the properties of the foam, which expands to fill the void between the wall and the panel.

The sealing of the joint between the panels and the bath itself is carried out with a silicone sanitary sealant or by means of a flexible plastic plinth.

The approximate amount of expenses is in the range of 5000 ... 7000 rubles.

The above finishing options were considered for cases of independent work. With hired labor, the cost of costs increases by about two times.

Finishing the bathroom in inexpensive and cheap solutions completely depends on what materials, who will be, and how the finishing work will be carried out.

Share this article with your friends on social media. networks!

How to finish a bathroom cheaply: choose available materials
The article will tell you about how and relatively inexpensively you can sheathe a bathroom.

Even with a small budget, you can make a beautiful and practical bathroom When purchasing a new home or living in an old one for a long time, it becomes necessary to repair it. Any updates are associated with costs that even the most economical person cannot always afford. In the absence of a significant amount of money, it is not at all necessary to postpone the replacement of a damaged finish on the back burner. It would be wiser to plan a budget repair using inexpensive, but high-quality materials. And you should start with the bathroom, which is one of the most important rooms in the house.

How to start an inexpensive bathroom renovation

Repair, like any change, begins with getting rid of the old and unnecessary. And this process can be called the most pleasant and easy part of the work: coatings that have become obsolete can be safely removed from walls and ceilings without worrying about their safety.

Cleaning of the premises is carried out in several stages:

• Disconnect plumbing,
• Removal of old coating from walls, floors and ceilings,
• Removal of previous layers of plaster, screed and waterproofing residues,
• Cleaning the room from dirt and dust.

If you are going to make repairs in the bathroom, the first step is to choose a finishing material for the floor and walls.

After getting rid of debris, all surfaces must be leveled with cement mortar. Slots must be sealed with sealant.

An obligatory stage is the waterproofing of the room. For the floor, you can use a coating composition, which is applied to the screed in one or two layers.

Cheap do-it-yourself bathroom renovation: material requirements

The bathroom is characterized by a special microclimate, which leads to rapid wear of materials. Therefore, when making even low-budget repairs, it is worth choosing a finish whose performance meets the requirements.

The materials used must have the following properties:

• high humidity resistance,
• The presence of antiseptic additives that prevent the appearance of fungus and mold,
• Resistant to aggressive compounds used to clean the bathroom,
• Ease of maintenance.

When buying materials for the bathroom, you should ask the seller for a certificate confirming their quality.

The best option for the bathroom - smooth surfaces. Due to the absence of irregularities and various volumetric patterns, the material does not accumulate dirt on itself, retaining its original appearance for many years.

When choosing a finish, you should also pay attention to the possibility of self-assembly. A simple do-it-yourself repair will cost less (approximately twice).

How to paste over a bathroom cheaply: we decorate the walls

A significant part of the costs falls on the design of the walls, which have the largest area when compared with the rest of the finished surfaces. Wallpaper is one of the options for the economy class, but before you paste over the bathroom with them, you should think carefully. This type of finish is very unstable to high humidity in the room.

Painting with a water-repellent emulsion is the cheapest way to decorate walls. For finishing, a special composition is used on a polyester or acrylic basis, which is applied to the surface after it has been leveled. The paint lasts for 5-8 years.

In the bathroom, you need to choose tiles of this color and texture so that it harmoniously combines with other finishing materials and pieces of furniture.

Among the budget options, the following types of finishes also have the necessary properties:

• plastic panels,
• Ceramic tile.

PVC panels are an inexpensive material that saves not only finances, but also time. Plastic strips fastened together do not require preliminary alignment of the walls and removal of old finishes. The installation of the panels is quick and can be done even by a non-professional.

If you want to decorate a small bathroom inexpensively, you can consider laying wall tiles. This material is resistant to moisture and mechanical damage, has a huge number of colors. The tiled bathroom looks nice and neat. A small budget in this case will not be a problem: you can purchase domestic products that have more affordable prices.

Bathroom renovation options: how to finish the ceiling and floor

The ceiling can be decorated in the same way as the walls. For example, paint with white paint or install plastic panels. This option is the most economical and practical.

For a small bathroom, installing a stretch fabric can be an ideal solution. The cost of such a finish depends on the area of ​​\u200b\u200bthe room, so installing a false ceiling in a small restroom will cost less than other options. Especially if you abandon the idea of ​​​​a designer canvas and make it matte white.

PVC panels are well suited as a finishing material for the ceiling.

Finishing the floor is the most important task on which the safety of using all plumbing equipment depends. That is why experts recommend that the first step is to update the waterproofing in the room, and only then repair the coating itself.

For finishing the floor in the bathroom, two materials with high durability and a variety of designs are suitable:

Linoleum will cost less than tiles, but if we are talking about a small bathroom or toilet, there will not be much difference in their cost. Therefore, the choice of coverage in this case depends on personal preferences. However, it should be borne in mind that the installation of linoleum is quite simple and is done by hand, which also significantly reduces costs. Having given preference to the tile, you will have to work hard with its installation. Or finish the floor with the help of a specialist.

Renovation of a small bath: updating plumbing

Buying a bathtub and sink is the biggest expense in a renovation. However, you can save even in this case. The solution to the problem will not be the acquisition of new equipment, but the restoration of the old one.

If the bathroom is small, then when decorating it, it is worth using materials and furniture in light shades.

The update is done in two ways:

• Application of two-component polyester enamel on the inside of the bathtub (the cheapest option),
• Restoration with liquid acrylic (it will cost more, but the result will be more durable and beautiful).

If the bath is in a very poor condition, you can purchase an acrylic liner. This is a special insert that is attached inside the bowl with a sealant.

The listed methods may not seem budgetary, because. are not very cheap. However, in any case, it will be more profitable to restore an old bath than to buy a new one.

Self-renovation of the bathroom can be carried out at almost any income. It is only important to carefully plan the whole process and acquire the necessary materials. The modern market offers a variety of finishes, so choosing a high-quality coating of low cost is not difficult. The main thing is not to get carried away, trying to save as much as possible: you need to pay attention not only to the price of the material, but also to its properties.

We make budget repairs in the bathroom: inexpensive options for finishing the room
Budget repairs in the bathroom require careful preparation and selection of materials that meet all requirements. About the types of inexpensive finishes and ways to save money during repairs in bathrooms - read on.

The question of how to finish a bathroom cheaply worries many people in our country. Average salaries do not allow you to make expensive repairs in the apartment and force you to resort to finding a budget option. Some of them for some reason believe that their dream cannot be translated into reality, but in reality this is not so. You can achieve aesthetics, comfort, durability and safety of the planned repair, using even relatively inexpensive materials. How to do it?

How to save on materials without losing quality?

It should be understood that expensive is not always high quality, and vice versa. The high price may be due to, say, the possibility of application in special situations, while your conditions do not require such dedication. The significant remoteness of the store from the production facilities of the producing company can increase the cost. Sometimes you have to overpay for a well-promoted brand. The difference in living standards in different countries should not be ruled out - if a product is produced in a state with high average incomes of the population and high salaries for all employees, then residents of all other countries are forced to dump themselves on this sky-high salary if they want to buy specific products. In general, to finish the bathroom cheaply, you should approach the task wisely.

The high price of finishing materials does not always indicate their quality, so if you don’t want to overpay, you need to choose wisely

Economic glue

Let's start with a simple one - with tiles, or rather, with glue for it. Tiles are one of the main materials for finishing walls and floors in the bathroom, and if it is often not worth saving on the tile itself, then glue is often overpaid. Consumers often prefer the famous Ceresit glue, refusing the cheaper Moment, without even suspecting that both brands belong to the same company. Of course, the two options differ from each other in the range of hardness, but for ordinary home repairs, as a rule, there is no difference. If for the walls there is still some point in acquiring more expensive consumables, then the tiles will not disappear from the floor even with the Moment, unless you arrange a dance floor in the bathroom.

Wall decoration

At first glance, it is obvious that the most expensive tile options may look more prestigious, but those who want to save money are more often interested in another question - is there a difference in strength and durability? It should be noted that usually it is still not there - you can trim the walls with cheap tiles for decades to come.

The difference in price is usually due to the attitude towards appearance - if expensive models are a real masterpiece, then budget options often seem to be done somehow, but most often this is just a visual deception.

The manufacturer can also save on non-slip coating, but if the finish is chosen for the walls, then this is not too important. Another thing is that laying tiles usually requires the involvement of professionals, so, in any case, this is not the cheapest option.

You can significantly save money by getting approximately the same result if you finish the bathroom walls with plastic panels. In terms of a variety of colors, they are not inferior to tiles, but they are much cheaper and much easier to install. Unlike tiles, damaged fragments are much easier to replace, and communications can be hidden under the panels. The installation of the panels does not require leveling the wall, however, due to the additional fixing profiles, the area of ​​​​the bathroom may be slightly reduced.

Plastic panels - an economical option for finishing the bathroom

Of course, the most budgetary repair option is painting the walls. Even the most expensive paint will cost the owner less than the same plastic panels, especially since even a child can do the job, because the only thing that is really needed for this is accuracy. However, this option is very limited in application - if the walls are crooked, then it will have to be abandoned. Of course, the wall can be leveled, but it is not easy to bring it to the ideal on your own, and the call of a specialist forces you to delete this design method from the list of inexpensive ones.

Floor decoration

For the floor, tile is also an ideal option - although it is expensive, it is still optimal in terms of practicality and durability.

The most practical option for bathroom flooring is tile, the cost of which varies over a wide range.

Linoleum is usually used in classic competitors, however, it should be borne in mind that an attempt to purchase a cheaper version of it is fraught with the rapid destruction of the repair - the material does not perceive constant moisture well.

Actually, the most budget solution for updating the flooring in the bathroom is simply to lay a new rug, if possible, picking it up to match the walls and the rest of the finish. At the same time, in order to prevent the appearance of mold, the rug should be regularly lifted and the floor under it wiped.

Ceiling and lighting

Repairing the ceiling surface in the bathroom with a limited budget involves the use of plastic panels that allow spotlights to be built into the ceiling.

Plastic panels on the ceiling in the bathroom

However, lighting fixtures can also be left on the wall, the main thing is to place them correctly.

A competent approach to the layout of the premises, as well as cleanliness and order will make it visually attractive and worthy of dear guests.

Plumbing

It is undesirable to save on plumbing and pipes, because any accident will force the owner to start repairing the bathroom from scratch. The quality should be maximum, but sometimes it makes sense not to buy new plumbing, but to restore the old one. If the bath has not lost its integrity, but has problems with the enamel coating, then it is better to renew it - modern materials allow for various kinds of enamel restoration, and it costs much less than buying a new bath bowl.

Making repairs in the bathroom, it is not necessary to purchase new plumbing, you can simply restore the old one

The option of buying equipment that was already in use on the market is not excluded - construction companies that carry out regular repairs in public institutions (for example, hotels) can rent out removed plumbing for resale. At the same time, before implementation, it usually undergoes restoration to a normal functional level and costs much less.

Latest bathroom details

When the interior is almost ready, it remains to add the finishing touches that will make the room ready for its intended use - we are talking about a curtain, shelves and hangers.

Accessories for the bathroom can be purchased the most simple and inexpensive, this will not make its interior worse.

The curtain can be found at very low prices if it is made of film or inexpensive fabric. If it is possible to invest a little more money now, in order to invest less later, it is worth paying a little more for a curtain made of waterproof fabric - it will more reliably protect against splashing water and last longer. It is important to choose a beautiful design of the accessory, and then its low cost will not seem obvious.

As for the shelves and hangers, they just need to be placed correctly, hitting the overall color scheme. If neatness and order reign on the shelves, the guest will not notice much difference between expensive and cheap accessories, and vice versa - there is no point in overpaying for a shelf if the appearance of the jars on it raises vague doubts about the solvency of the owner.

How to cheaply decorate a bathroom: what can you save on?
How to refurbish a bathroom. What is worth saving and what is not. How not to overpay for plumbing. Budget option for repairing walls, floors and ceilings.

When decorating a bathroom, tiles are most often used. It's not about tradition, it's really comfortable material. Hygienic, not afraid of moisture, beautiful, durable. But this is not the only suitable material, in our time there is something to finish the bathroom other than tiles.

Wallpaper

Paper ones are not suitable, they are short-lived in damp conditions. Acrylic and vinyl are better. When buying, we choose with the “three waves” symbol or a painted washing brush (moisture resistant), they are more stable. But still, water resistance is insufficient: moisture penetrates at the joints and gradually makes it unusable.

And these fit perfectly. They are made like fabric, only the threads are made of glass. Special jacquard looms allow you to get a variety of surface patterns.

Very solid coating, durable (serve up to 30 years), environmentally friendly, non-flammable, does not require a perfect surface when applied. Not afraid of fungi, dampness. Not only that, these wallpapers themselves protect the walls from damage, so strong. Alas, the price is much higher than ordinary wallpaper, but it's worth it.

Do not confuse when applying: the inside and outside are similar, but there are differences. In rolls, the front side is wound inside, some manufacturers mark the outside with a colored stripe. Special glue required. The fears of "harmfulness" transferred from glass wool are stupid and due to a lack of information: these are completely different materials. After finishing the walls, such wallpapers can be left as they are, as well as painted, primed or decorated additionally - as desired. Such wallpapers will adequately decorate the bathroom.

Similar to wallpaper, but made of PVC film, the adhesive is already applied. Cheap, but requires very careful preparation of the walls before finishing, which increases the cost of the result. And yes, you have to be very careful. And still unstable, sometimes it swells or peels off, which does not paint the bathroom ...

On video: range of pvc panels

Simple finishing: 2 slats are strengthened, panels are attached to them in turn. Large selection, low cost, resistance to moisture. In addition, they can cover pipes, cables, without complicating access to them, even minor construction flaws in the walls. True, moisture condensation is possible between the walls and panels. In addition, the material is fragile, dents or tears remain from the impact (however, this damaged panel is easy to replace if you left spare ones). They turn yellow over time. Another minus: the availability and simplicity of the material determines its prevalence in public places. And the bathroom (by analogy) doesn't look chic enough...

We can only talk about moisture-resistant drywall, the other is not suitable for lining a bath. Cheap, easy to install, improves sound insulation. By itself, it is not particularly beautiful, so subsequent painting is desirable. In addition, when installing, the volume of the bathroom decreases, and if it is already small ...

Mosaic

Time-consuming finishing, and artistic taste is needed at the same time. But a wide choice, in principle, any pattern is possible. But, with regard to care, the tiles are simpler in this regard, they have fewer irregularities.

Stone, natural and artificial

Naturally expensive, so much so that for some this may be a disadvantage, not an advantage. The stone is heavy, which requires special care during installation. Better to hire a specialist. Marble (often referred to as breccias, dolomite, carbonate mixtures) requires maintenance. Granite has a high strength. A high price alone does not guarantee amazing results. Let's say, completely finishing the bathroom with granite slabs, you can turn it into a kind of cave, and not at all chic ...

Reduces space, so a poor choice for small spaces. Artificial is in many ways similar to natural, but much cheaper.

Wood

Good choice. The material requires special impregnation, yet it can be used in dampness. You can gently burn the panels, saturate them with stain to develop texture, than make them more beautiful. It cheers you up somewhere on a subconscious level, perhaps we are all druids in a past life. Dear. Requires appropriate design in other elements of the bathroom (hangers, shelves, mirrors).

A bit like ordinary plaster in application - also a thick mass smeared on the wall. But only in the eyes of a non-specialist, in fact, a special material. Very beautiful if done right. Now various types of such plaster are being produced, so it is not difficult to choose the beautiful under your concept. In addition, the “marbled” finish is very significantly different in cost from real marble. Clearly, in the direction of cheapness.

Painting

Perhaps one of the cheapest options for replacing tiles (although the price depends on the selection of paint), it is better to use latex paint - it is resistant to moisture. The result depends little on the method of application - any one is suitable: brush, roller, spray. And strongly - from the artistic taste and skill of the performer. This does not mean a monochromatic painting, although here you can pick up any color. You can draw real pictures or use stencils. Alas, the gray soviet walls evoke only despondency...

Considered the most expensive. It will be quite difficult to qualitatively carry out the registration procedure without resorting to the services of professional companies. However, often buyers with a small budget practice this. For the bathroom, you should purchase high-quality materials that can serve in conditions of high humidity. You need to understand that it is the properties that characterize the purchased goods that will affect the duration of their operation.

After buying a new home, any family faces some financial difficulties. That is why the finishing option must be selected rationally in order to ensure not only a long period of operation, but also a pleasant appearance of the room. Ideally, if you do everything right, you can get the highest quality restoration of the room at minimal cost. Next, we will talk about how to carry out a budget repair of the bathroom and toilet (photo in the article) on our own.

Material requirements

Even if the finishing materials are inexpensive, they must fully comply with all building codes. This is due to the fact that the microclimate in the bathroom has a number of features that accelerate the wear of materials. At the time of considering the purchase, it must be borne in mind that in such a room the humidity is increased, there is practically no ventilation and constant significant temperature changes occur. That is why all the materials with which the decoration is performed must have certain qualities. Then the budget repair of the bathroom and toilet will be 100% successful.

Moisture resistance

You need to understand that any finishing materials that are intended for use in the bathroom must have water-repellent properties. In such a room, the walls and floor will be in contact with moisture, steam and hot air.

The next point to pay attention to is the resistance to the formation of fungus and mold. It is advisable to give preference to finishes that have antiseptic additives, they will help prevent the appearance of pathogenic microorganisms. This is due to the fact that the room is constantly humid, so the fungus and mold quickly begin to accumulate.

Chemical resistance

Finishing materials that are resistant to household chemicals will be the best solution. Any hostess understands that the bathroom should be as clean as possible, and it is impossible to maintain hygiene without the use of aggressive detergents. Accordingly, you should choose something that easily tolerates exposure to chemicals. Among the materials that can "boast" of such a property, there are also inexpensive ones, which is especially important when performing budget repairs in the bathroom.

Ease of maintenance and installation

Another important property is ease of maintenance. When making repairs with your own hands, it is necessary to choose those materials that have a smooth surface, easily cleaned of dirt. Thanks to this, it will be easy to maintain order.

When choosing materials, making budget repairs in the bathroom, it is also necessary to take into account the ease of installation. The simpler this is done, the better it will be for the owner. You need to understand that if you have to hire professionals, then the cost of repairs can increase two or even three times.

wall decoration

This surface has the largest area. For the decoration of the walls, as a rule, the most funds are spent. If you want to reduce costs, you need to choose high-quality materials that are not so expensive. Don't be in a hurry to buy. To save money, you should visit trusted shopping centers, stores, or seek help from customer reviews who have already purchased one or another type of finish and tried it in practice. Wanting to make a budget renovation in the bathroom, you can not stop at the first available option. At the same time, it is fundamentally important to make the right choice in favor of the ratio of price and quality.

Coloring

The most budgetary and high-quality option would be staining. What is the advantage of this method? The cost is as affordable as possible, and anyone can paint the wall with their own hands. As a rule, moisture-resistant polyester or acrylic-based options are used for the bathroom. They are applied in several layers, rollers, brushes or an airbrush are used. Before applying the material, it is necessary to level the walls, so the painting process can take a lot of time, more than a week. Of the minuses, it should be noted that this type of finish retains a fresh look for no more than 8 years. In addition, to make the walls look attractive, it is advisable to entrust the painting to professionals. It is to this method of finishing that experts advise resorting to people who want to make the most budgetary repairs in the bathroom with their own hands.

Plastic panels

They are also often used in wall cladding. This option also does not apply to the list of expensive ones. It's about paneling. They are made from PVC. If you don't understand what it is, then you should explain. Such strips are made of cellular plastic. Their length rarely exceeds 3 m, and their width is 40 cm. They are connected to each other using tenon grooves. Such a panel does not require additional alignment of the walls, it can also be glued on top of the old finish. That is why this option is in demand for budget repairs in the bathroom.

Ceramic tile

A popular option for wall decoration is ceramic tiles. It costs more, but it has many advantages. Firstly, the tile is resistant to mechanical damage, and secondly, it is able to withstand changes in temperature and humidity. This option will be great for those who do not want to go beyond their budget, but would like to get a fairly high-quality finish. Among the inexpensive ones, ceramic tiles of domestic and Belarusian production are in demand.

Priority finishes

It is worth noting: if there is no opportunity and time to perform high-quality repairs in the bathroom, and it is urgently needed, then the best option would be to use plastic panels. They are easy to install even for inexperienced people: you do not need to prepare the walls for this process, as well as clean them from the old finish. This material is ideal for a budget bathroom renovation. The photo is a direct confirmation of this.

Choice of wall paint

As already mentioned, the bathroom is a rather specific room, so it is necessary to use paints with antibacterial properties and a moisture-resistant effect. Otherwise, the coating may peel off, a fungus will quickly appear. The most common paints are silicone, latex, acrylic. They are inexpensive and have excellent features. At the same time, it should be noted that water-based mixtures do not have an unpleasant pungent odor, and silicone ones can be a hydrobarrier.

Traditional oil paints do not have the above advantages. They crack quite quickly, so it is better not to use them in the bathroom. Even when making budget repairs in the bathroom, you should avoid such cladding products.

If you want to choose shades other than white, then calm and warm tones should be preferred. It is advisable to refuse dark ones, since such an option will visually reduce the space. Bright spots and complex patterns will also not bring a “zest” to the design. Soft pastel colors will expand the room and additionally fill it with light.

Paint can be selected matte, glossy or semi-gloss. The first option will allow you to remove drops, smudges, and such material will also be able to hide all wall defects. What is not suitable for a budget bathroom renovation with your own hands?

Wallpaper selection

It must be said right away that they must be waterproof. At the time of purchase, you should pay attention to the material. It should not be thin, and you should also ask about manufacturing technology. The most commonly used vinyl wallpaper on non-woven base. They are modern, have high performance, durable, can withstand the effects of water for a long time. Today it is easy to find a suitable decor option. Of the shortcomings, only the expensive cost should be noted, as well as the impossibility of mounting on ordinary wallpaper glue: you will have to buy a special mixture.

The second most popular wallpaper is washing. They belong to a cheaper segment, as they are inferior in their characteristics to the above option. Most often they are used in areas of walls where there is no direct contact with water.

Self-adhesive wallpapers are the most expensive. They are created from a polymer film, which is sold in various designs. Of the shortcomings, it should be noted not only the cost, but also how difficult the installation is. Moreover, before applying them, it is imperative to make the surface perfectly flat. Another good cladding option for a budget bathroom renovation. A photo of such a finish is present in the article.

Floor finish

Finishing the floor is also an important task, since the safety of all households depends on it, as well as ease of use. Professionals do not advise using cheap options that do not have surface waterproofing. After all, it is these materials that rarely help with leakage or breakdown of any household appliances. It should be noted that if the repair of the dwelling was quite a long time ago, and the age of the room is more than 30 years, then it is advisable to open the old floor during the reconstruction of the bathroom and completely renew the waterproofing. In this case, coating, painting or roll materials should be used. This also applies to budget bathroom remodeling options.

The second most important question is what kind of finish to choose. Linoleum is inexpensive. This material perfectly copes with mechanical impact, it is wear-resistant, and also pleases with its low price. Such a modern finish can last at least 15 years, after which it changes with maximum ease.

Further, the second most popular among economical users is tiles. You can buy both ceramic and porcelain stoneware. If your bathroom does not differ in overall floor area, then very little material will be required for finishing. Due to this, you do not have to spend large sums. This option will remain budgetary for those who will independently carry out the installation.

Professionals say that during the repair, regardless of the limitations in its financing, it is necessary to remove the old floor right down to the concrete base. After that, make waterproofing and only then level the surface using a screed. Only in this case the bathroom will be maximally protected from leaks.

Reconstruction

Traditionally, in Russian apartments, bathtubs are most often used, not shower cabins. That is why the cost of replacing the washing container can be quite high. As a rule, they make up from a quarter to a half of all expenses. Experienced people working in the field of bathroom design notice that it is better not to completely change all the equipment to cheap ones, but to improve those materials that are already available. For this, reconstruction methods are used that allow you to carry out a budget bathroom renovation with your own hands. What is it about?

The tub can be re-enamelled. This method will be the most inexpensive, which will not only restore the appearance, but also add shine. Enamel should be applied to the inner surface. You can do it yourself without resorting to the help of professionals. It is best to use a special composition of polyester type. Brush through two or three times. You can also use a roller or spray gun. In general, for a budget option for repairing a bath, this method is suitable.

The next low-cost process should be called restoration with liquid acrylic. A cast iron bath can be restored with this material. You need to apply it to the inner surface using brushes. This method is also called the "bulk bath". It should be noted that it costs more than enamel, but its effect is more persistent.

It is also considered a budget option to repair a cast-iron bath. Perform it by installing an acrylic liner. If the product is already in very poor condition, then it can be restored with a similar material that is installed in the base of the bathroom. The insert should be glued either with sealant or special glue. It is expensive, but the cost of acquiring such a bowl will be much less than the price of the bath itself.

According to reviews, many give priority to an inexpensive, but quite effective procedure for enameling a bath. It allows you to improve the appearance of the product. In addition, this tool guarantees a minimum of costs, which is ideal for budget do-it-yourself bathroom renovations.

Anton Tsugunov

Reading time: 5 minutes

A bathroom is a room that is updated infrequently. Usually cosmetic finishing is carried out here. And only with significant damage to communications or coatings, they radically change its appearance. With a lack of funds for expensive materials and a qualified team of workers, you can get by with low costs by choosing a budget way to renovate a bathroom. Some designers are specifically engaged in the creation of inexpensive projects for the arrangement and decoration of bathrooms. The choice of the optimal solution for your bathroom depends on the goals pursued by the owner of the apartment. Most people want to make repairs with high quality and for a long time in accordance with fashion trends, but use inexpensive building materials. This is a completely justified desire. Therefore, the question arises of how and from what to carry out a budget bathroom renovation.

How time saves on repairs

Many of us do not think about such things:

• Repairs made on time can save you a lot of money.
• the choice of the right materials helps to increase the operational life of plumbing, pipes and coatings;
• quality work creates temporary advantages in the use of the bathroom space.

Bathroom - a room in which water and sewer communications are concentrated. They are the first to fail. In the process of active operation, the coating on the bathtub, toilet bowl, and sink deteriorates. They change color. They form chips and cracks. All this makes the owners think about replacing the main objects of this room. However, we do this when patching holes is already impossible. And then you have to spend significant amounts on materials and the work of specialists.

Undoubtedly, it is better to solve the problem with an unsightly interior in time, using durable materials, and enjoy the excellent condition of your bathroom. Products for finishing bathrooms of high quality are very expensive. Thinking about savings, consumers often buy products, formulations and coatings from a range of "second-rate" products that quickly lose their properties.

If you are going to make budget repairs for a long time, you should think about the service life of the main materials and try to choose the most optimal options.

Where to begin

To understand how much money you have to invest in a bathroom renovation, you need to find out all the ins and outs of it. To do this, remove all old coatings, conduct an audit of water and sewer pipes, and examine the state of plumbing.

If they need to be completely restored, materials with a long service life are chosen from among modern high-strength compounds. In most apartments, the bathroom is a small room, so not so many materials are needed. It is not worth saving on plaster and putty. They will ensure the safety and durability of decorative coatings, which can be purchased at a budget price.

A freshly refurbished bathroom is usually fitted with new plumbing. Here you can think about buying a bathtub, toilet and sink, or updating old ones with special liquid formulations. This will require the help of a specialist who will quickly restore used plumbing.

Surface preparation

After removing the old coating, all the flaws in the walls, ceiling and floor are found. First anew , and on the lower surface . For these works, it is advisable to use a cement mortar. It is not as expensive as modern building mixtures with special components. In addition, good quality gray plaster is a solid base for cladding.

cosmetic finish

• for a budget option for decorating a bathroom, paints made on the basis of latex or acrylic are used. They have moisture resistance and good performance properties. Of course, all surfaces in the bathroom are best, but this is an expensive solution. The tile can be applied partially: make a half-meter border around the bathtub and sink from white squares, and paint the rest of the walls and ceiling in the color you like;

• a good option for the ceiling is a stretch fabric made of synthetic material. It is inexpensive, since its area is small and the amount of work for installers is insignificant. Serves for quite a long time. When using it, you can save on the restoration of the base. The canvas will hide all visible defects;

• an economical solution for finishing walls and ceilings. But not those that are attached to the crate: they eat up part of the space and require additional costs for related parts. It is necessary to use canvases that are glued to a special composition directly to the surface. However, for this it is important to align them as accurately as possible;

• the floor requires special attention, as it is most exploited. It is not worth saving on tiles here. This is the best bottom base cover in all respects. But, based on the overall dimensions of most bathrooms, you won't need much. In addition, matte embossed products, which are most suitable for bathrooms, are slightly cheaper than glossy and smooth ones.

HELPFUL INFORMATION: How to paint the ceiling with water-based paint correctly and without streaks

Plumbing

Now a lot of items for hygiene procedures are being sold, differing in color, shape, size and materials from which they are made. Naturally, they differ in price. If there is no need for a daily bath, you should think about installing a shower cabin. It will save space and money, as it has a compact size and is cheaper.

With a limited budget, you can get by with simple models of sinks and toilets, if the apartment has

August 26, 2016
Specialization: master in the construction of plasterboard structures, finishing work and laying flooring. Installation of door and window blocks, facade finishing, installation of electrics, plumbing and heating - I can give detailed advice on all types of work.

I know from experience that those who decide to do budget bathroom renovations often spend even more than those who do not bother with savings much. This is due to a number of factors: from the use of low-quality materials to the hiring of unskilled workers. I will share my experience in carrying out work and tell you how to meet the minimum budget and get an excellent result.

Description of the workflow

To better understand all aspects of this topic, I will explain with a specific example. So we have:

• a typical room in a nine-story building of the P-44 series;
• the size of the room is 1.7 by 1.7 meters, the ceiling height is 2.64 meters.

We will consider how much the decoration will cost us, I will not touch on the plumbing, since most often if the repair is done as economically as possible, then these elements do not change.

Stage number 1 - competent organization of the process

If you want to save on repairs, then these rules should become fundamental for you:

Do it all by hand	If we consider the cost of the services of specialists, we can notice such a feature that their work costs about the same as the materials. And taking into account the fact that we will use the most budgetary solutions, it is easy to guess that you will pay more for the services of builders than for materials. The conclusion is simple: we do everything ourselves and reduce the cost of the project by more than half
Use quality materials	I talk about how to make repairs using inexpensive, but not low-quality materials. In pursuit of savings, many begin to go too far and buy the cheapest product options, but this is not worth doing, as their reliability and appearance leave much to be desired. I will tell you how to choose solid solutions and at the same time pay a little
Follow the technology of work	Below I will tell you how to finish each of the sections, the process is described in steps, and there is not a single extra step in it. There is no need to skip individual stages, as this will inevitably reduce the quality of the work and negatively affect the final result.
Don't reschedule	If you want, among other things, to change the layout, then hoping for the cheapest repair is at least stupid. Any manipulations with the rearrangement of plumbing lead to the fact that it is necessary to shift communications, and here it makes no sense to save, everything must be done expensively and reliably

Another very important recommendation that directly affects the cost of the project is the use of those materials that are easy to work with and that you can lay or attach with high quality. Many times I completed repairs for those who overestimated their strength and, having completed a small part of the repair, realized that they would not master it. Then, of course, you need to spend a lot of money on the wages of the builder.

Be prepared for the fact that you will have to spend a lot of time and instead of cozy quiet evenings watching TV, you will have to destroy, level, lay, saw, fasten, and so on. There is no free cheese in mousetraps, you will have to pay for the savings with your time, but if you take into service all the tips from this article, then the costs will be minimal.

You must have a work plan in advance in order to make an economical repair from scratch with your own hands, you need to clearly plan each step and accurately calculate the materials so as not to purchase too much. Just read all the sections below, and based on them, you can easily draw up a clear plan.

Stage number 2 - the acquisition of everything you need

I will tell you how the simplest estimate for bathroom renovation is compiled - the sample can be adapted to your room in order to carry out all the calculations. The estimate is a list of the necessary materials indicating their quantity and cost, since we carry out the work ourselves, it makes no sense to include their cost, unless you assign yourself a financial incentive for a successfully implemented project.

The calculation of the cost is made for the individual parts of the room, we will consider each of them and start with the floor. Linoleum will be laid on the floor, let's figure out how to choose it:

• Since the room is damp, you should purchase options without a base or based on PVC, since it is not afraid of dampness and mold and fungus do not form in it.
• The dimensions of the bathroom are 1.7x1.7, the area is 2.89 square meters, but no one will cut the material according to our dimensions, it is sold in linear meters. In our case, the optimal width is 2 meters, since there will be the least waste from it, we need 2 linear meters, that is, 4 squares;

• Having called all the retail facilities, I found a PVC-based option, which cost 224 rubles per square meter. Upon inspection, I made sure that the surface is strong without damage and marriage, the substrate is elastic, and the material is . As a result, I paid 896 rubles for 4 squares;
• In order for the joints of the floor and walls to be neat, a plinth is needed, I found a plastic “Comfort” at 56 rubles apiece 2.5 meters long. We need to close 3 walls, and on the fourth there is a door 60 cm wide with 8 cm cashings, that is, the opening occupies 76 cm. waste from elements that will go to the walls;

• As a result, you need to purchase 3 skirting board strips for 56 rubles each, 4 inner corners for 35 rubles each and two plugs - right and left for adjoining the door frame, they cost 27 rubles. Adding all the results, we get (56x3) + (35x4) + (27x2) = 362 rubles;

• We will use liquid nails to fix the baseboard, I bought a convenient 200 ml tube for 104 rubles.

Now let's summarize all the expenses: I spent 896+362+104=1362 rubles on finishing materials for the floor, compared with conventional projects, the amount is several times less.

We will level the ceiling with putty and paint it with moisture-resistant white, so we need the following materials:

• To level the surface, I use the composition "Vetonit VH", which is designed for use in wet areas and guarantees a reliable result. The ceiling did not have significant irregularities, so one bag of composition weighing 20 kg is enough, which costs 456 rubles;

• For painting, we need paint for wet rooms, I chose the latex-based option. You need to apply the composition in 2-3 layers, so I bought a 3 kg package, for which I paid 190 rubles;

• To treat the surface and strengthen it, a primer is needed, I purchased Tikkurila products with a volume of 900 ml for 124 rubles, this is quite enough for our purposes.

Now we summarize all the costs: 456 + 190 + 124 = 770 rubles we need for the ceiling.

Let's move on to the most expensive part - the walls, for them I chose PVC panels 250 mm wide and 2.7 meters long - there will be a minimum of waste. This material is not afraid of moisture, it is easy to wash, so it is suitable for the bath just fine.

Let's figure out what we need to work:

• It is necessary to calculate the number of panels, with their width of 250 mm, you need to divide the length of the walls by this indicator. But we must not forget that on one of the surfaces there is an opening measuring 700x2100, on one side of it there will be one whole panel, on the other three, and above the doors we will need three pieces 540 mm long, that is, we will cut one element. So, on the wall with the door we need 4 whole panels, remember this figure and move on;
• Divide the wall length of 170 cm by 25 cm, we get 7 panels, multiply this result by 3 and get 21 pieces. We add 4 panels from the above paragraph and get 25 elements - so much is needed to decorate the walls in the bathroom. I found products for 127 rubles apiece, the total costs amounted to 3175 rubles;
• For installation, we need components, first of all, this is an internal corner, these elements are sold in pieces of 3 meters and cost 50 rubles. We need 4 pieces, that is, the costs will be 200 rubles;
• Above, below and around the perimeter of the opening, I decided to put a starting profile, which is sold in pieces of 3 meters, you need 4 elements on top, 2 elements to frame the doorway, you can also join the pieces at the bottom, since this part will be closed with a plinth, but you still need 1 whole piece. In total, 7 starting bars are needed, the costs at a price of 45 rubles will be 315 rubles;
• We will mount the panels on a bar measuring 25x50 mm, it will be located horizontally in increments of 30 cm so that the surface is strong and does not sag. With a height of 264 cm, 9 rows need to be fixed, we count in running meters 9x1.7 = 15.3 meters, multiply by 3 whole walls and get about 46 meters;

• On the wall with a door, there will be less material, 3 pieces 170 cm long, 6 pieces 80 cm long and 6 pieces about 20 cm long. In addition, you need to nail vertical strips along the opening, 2 pieces 210 cm each for its secure frame. As a result, we get the following result (170x3) + (80x6) + (20x6) + (210x2) = 1530 cm or the same 15.3 meters;
• Summing up all the numbers, we get 61.3 meters, the bar is sold in pieces of 3 meters, that is, we need 21 pieces. We have lumber of this type costs 40 rubles apiece, that is, I spent 840 rubles for the entire volume;
• I will fasten all the elements using a stapler, I will need staples, a package of 1000 pieces costs 45 rubles, and this is quite enough for the job.

• The bar will be fastened with 6x50 quick-mount dowels, about 200 pieces will go to all the walls, at a price of 25 rubles, the cost is 500 rubles.

Let's calculate all expenses: 3175+200+315+840+45+500=5075 rubles.

For clarity, I will show all the results in a pivot table:

Bathroom floor
Material name	Quantity	Amount, rubles
Linoleum	4 sq.m.	896
Plinth 2.7 meters	3 pcs.	168
Inner corner	4 things.	140
Plug left and right	2 pcs.	54
Liquid Nails	200 ml.	104
Ceiling
Putty "Vetonit VH"	20 kg	456
Latex paint	3 kg	190
Strengthening soil	900 gr.	124
Walls
PVC panels 2500x250 mm	25 pcs.	3175
PVC inner corner	4 things.	200
starting bar	7 pcs.	315
Edged bar 25x50x3000 mm	21 pcs.	840
Staples for a stapler pack. 100 pieces.	1 pack	45
Fast mounting dowel 6x50	200 pcs	500
TOTAL:		7207

As you can see, a cheap do-it-yourself bathroom renovation is not a fantasy or a fairy tale, while I did not use the cheapest compositions and materials, everything I purchased is of good quality and attractive appearance.

Stage number 3 - dismantling of old coatings

It is impossible to carry out work without removing the old tile or without removing the worn floor covering. Of course, if you have a floor or ceiling in good condition, then it makes sense to leave them. For example, if the tile on the floor looks normal, then you can freshen up the surface by removing the old grout and filling the joints with a new compound. The same applies to the ceiling: if it is even, then you can remove the old coating and repaint it.

But in practice, most often it turns out like this, then you need to do the floor, and the walls, and the ceiling, so I will consider just such an option, before making repairs on a budget, I will have to sweat to remove the remnants of old coatings.

The following work is to be done:

• On the ceiling, most often old whitewashing or paint that has turned black from time to time. Sometimes there are many layers on the surface, and it takes a lot of time to remove them. I use a scraper, but you can use a spatula, knife and any other device convenient for you, the main thing is that you can remove the old coating;

Old whitewash and water-based paint will come off much easier if the surface is well moistened and left for 20-30 minutes.

• As for the walls, they can either have many layers of paint and whitewash, or old tiles. The compositions are cleaned off as described above, but you will have to tinker with the tiles, it is best to use a puncher with a special blade for work. If there is no power tool, then you will have to work the old fashioned way - with a hammer and a chisel, the work is tedious, but one way or another it needs to be done;

• Lastly, the floor surface is prepared, in my case there was linoleum, so the work was simple: I removed the old coating and got a flat surface, completely ready for work. If you have an old tile, you will have to tinker, removing it from the surface, the same tools are used for work as in the paragraph above.

Naturally, you need to take out everything superfluous from the room, you should only have prepared walls left.

Stage number 4 - finishing the ceiling

It is from this part of the bathroom that I advise you to start work for the simple reason that a lot of dust will form in the process, and the putty may fall down. The finishing option that I am considering is the most budgetary - you can achieve an excellent result with your own hands for the simple reason that the ceiling area is small and it will not be difficult to perfectly align it even with a lack of experience.

The instruction for the work looks like this:

• First you need to check the plane with a level or a flat bar to see what irregularities need to be eliminated;
• The surface must be treated with a primer to strengthen it and remove dust, the composition is applied with a brush and dries for about an hour;
• Then the composition is prepared, it retains plasticity for a couple of hours, so I advise you to do no more than 5 liters at a time, your work speed will be low, so you are unlikely to use up more. All the features of mixing the composition are indicated on the packaging, so there should not be any problems with this part of the work;

• The first layer needs to eliminate all significant irregularities, if there are none, then simply putty the entire surface, creating a kind of base, do not worry about stains, they will be eliminated. After the surface dries, the influxes are easily cut off with a spatula, after which you need to check it with the level again;
• The second layer should level the ceiling, try to do the work carefully, there may be sagging on the surface, but the holes should not remain, since they cannot be eliminated. In extreme cases, you can walk a third time if the ceiling was uneven and you have to display a plane with large drops;

• After drying, the dirtiest part lies ahead - grouting the surface, bring a respirator and goggles, as when sanding, the dust will fly into the eyes and enter the respiratory tract. In order to control the plane, use a simple trick: hold a light bulb near the surface, it perfectly shows all the irregularities and allows you to perfectly level the surface at one time;
• After finishing work, the surface is cleaned with a brush or broom, after which it can be painted. The work is carried out in 2-3 layers, you can use both a brush and a roller, it all depends on convenience. Each subsequent layer is applied after the previous one has completely dried.

Stage number 5 - flooring flooring

When considering how to make a floor economically, linoleum will always be out of competition, not only due to its low price, but also the reliability and durability of the coating. In the bathroom, this coating is placed very simply:

• The surface is cleaned of dust and debris, it can be wiped with a damp cloth to clean as well as possible;
• Next, the material is spread, it will go onto the walls, so you need to place it evenly, after which the excess is cut off with a construction or any other sharp knife. Do this carefully, as it is unlikely that you will be able to glue what is cut off by mistake;

• We don’t have any joints, which simplifies the process, the only thing is that you may need to fix the material in the doorway, for this you can buy a metal threshold.

Due to the fact that the area of ​​\u200b\u200bthe room is small, plus there will be a bathtub on the surface, there is no need to glue linoleum, but if you want to strengthen the coating, you can use double-sided tape. The plinth will be fixed subsequently, at this stage this stage can be considered completed.

Stage number 6 - wall decoration

First, a process diagram is presented, and below each stage is described in detail:

• The frame is leveled; when attaching elements, you can put chips and pieces of wood under them to output the ideal plane. A hole is drilled in the bar, then a hole in the wall is drilled right through it and a quick-mount dowel is hammered. You can fill your hand in literally 10 minutes, so the process will go quickly;

• Then, corners are attached in the corners, and a starting profile is attached above and below, as well as around the perimeter of the opening.. The main thing is to accurately cut the bar at the joints so that everything looks neat. Fastening is done using a stapler, it is very fast and very reliable;
• A panel is inserted into the upper and lower guides and wound into a corner, after which it is fixed with brackets to the bars. The work is done in this way until the entire wall is finished, the last plank is cut so that it is 3-4 mm wider, the corner or the starting profile is slightly bent and the element falls into place. Plastic bends well, but you still shouldn’t be too zealous, do everything carefully.

After finishing the walls, you can glue the plastic plinth, do not forget to put the corners and plugs so that all the elements fit perfectly with each other.

This is a simple example of how to make a cheap bathroom renovation, even if you spend 1-2 thousand more, but still the costs are not comparable to those that you would incur using standard materials and hiring builders.

Conclusion

It is quite possible to transform the bathroom, while spending a little more than 7 thousand, and I showed this with a specific example. I tried to talk about everything in detail so that you can understand the topic, and the video in this article will clearly show some important points so that you understand some of the nuances even better. If you have any questions - write them in the comments below.