Job responsibilities of a 3rd category instrument adjuster. Etx

This job description has been translated automatically. Please note that automatic translation does not provide 100% accuracy, so there may be minor translation errors in the text.

Instructions for the position " Adjuster of instrumentation and automation of the 8th category", presented on the website, complies with the requirements of the document - "DIRECTORY of qualification characteristics of workers' professions. 42 issue. Metal processing. Part 1. Managers, professionals, specialists, technical employees. Part 2. Workers. Book 1. "Metal casting", "Metal welding". Book 2. "Drawing, squeezing, cold stamping of metal. Production of heating boilers, metal tanks and similar products", "Forging, high and low temperature metal processing". Book 3. "Turning, drilling, milling and other types of processing of metals and materials", "Coating metals with metals. Coloring". Book 4. "Coating of metals with non-metals: enameling and other types of coating", "Locksmith and assembly work in the production of machines"", which was approved by order of the Ministry of Industrial Policy of Ukraine on March 22, 2007 N 120. Agreed by the Ministry of Labor and Social Policy of Ukraine. Put into effect since April 2007 The status of the document is "valid".

Preface to job description

0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. The position "Adjuster of instrumentation and automation of the 8th category" belongs to the category "Workers".

1.2. Qualification requirements - incomplete higher education (junior specialist) without requirements for work experience or vocational education, advanced training and work experience by profession as an adjuster of instrumentation and automation of the 7th category - at least 1 year.

1.3. Knows and applies:
- ways to build control systems based on microprocessor technology;
- schematic diagrams of programmable controllers, micro- and minicomputers;
- ways to adjust technological and test programs;
- organization of a complex of works on adjustment and troubleshooting of devices and systems of computer technology;
- construction and diagnostics of unique measuring and control systems and complexes;
- theory of automatic control;
- the main "language" of programming, which are used in specific technological equipment.

1.4. The adjuster of instrumentation and automation of the 8th category is appointed to the position and dismissed from the position by order of the organization (enterprise / institution).

1.5. The adjuster of instrumentation and automation of the 8th category reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. Adjuster of instrumentation and automation of the 8th category directs the work _ _ _ _ _ _ _ _ _ _ .

1.7. The adjuster of instrumentation and automation of the 8th category during the absence is replaced by a person appointed in the prescribed manner, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Performs complex adjustment, regulates and puts into operation complex, especially complex and unique instrumentation systems and equipment control systems based on microprocessor technology with the performance of restoration repair work of these systems, programmable controllers, micro and mini computers and other equipment of electronic computing equipment, as well as peripheral equipment and diagnoses them using test programs and stands using computer technology.

2.2. Adjusts, repairs, regulates and puts into operation digital electric drives using "intelligent" sensors.

2.3. Develops custom boards for control systems.

2.4. Compiles test and corrects technological equipment programs.

2.5. Analyzes, systematizes failures in the operation of technological equipment and develops

2.6. Knows, understands and applies the current regulatory documents relating to its activities.

2.7. Knows and fulfills the requirements of regulatory acts on labor and environmental protection, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The adjuster of instrumentation and automation of the 8th category has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. The adjuster of instrumentation and automation of the 8th category has the right to receive all social guarantees provided for by law.

3.3. The adjuster of instrumentation and automation of the 8th category has the right to demand assistance in the performance of his duties and the exercise of rights.

3.4. The adjuster of instrumentation and automation of the 8th category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. The adjuster of instrumentation and automation of the 8th category has the right to get acquainted with the draft documents relating to his activities.

3.6. The adjuster of instrumentation and automation of the 8th category has the right to request and receive documents, materials and information necessary for the performance of his duties and instructions of the management.

3.7. The adjuster of instrumentation and automation of the 8th category has the right to improve his professional qualifications.

3.8. The adjuster of instrumentation and automation of the 8th category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The adjuster of instrumentation and automation of the 8th category has the right to familiarize himself with the documents defining the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The adjuster of instrumentation and automation of the 8th category is responsible for the failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The adjuster of instrumentation and automation of the 8th category is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The adjuster of instrumentation and automation of the 8th category is responsible for disclosing information about the organization (enterprise / institution) that is a trade secret.

4.4. The adjuster of instrumentation and automation of the 8th category is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.

4.5. The adjuster of instrumentation and automation of the 8th category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The adjuster of instrumentation and automation of the 8th category is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The adjuster of instrumentation and automation of the 8th category is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

Require the creation of conditions for the performance of professional duties, including the provision of the necessary equipment, inventory, a workplace that meets sanitary and hygienic rules and regulations, etc. 4.5. Require the management of the organization to assist in the performance of their professional duties and the exercise of rights. 4.6. Get acquainted with the draft decisions of the organization's management regarding its activities. 4.7. Improve your professional qualifications. 4.8. [Other rights provided for by the labor legislation of the Russian Federation]. 5. Responsibility The adjuster of instrumentation and automation of the 5th category is responsible for: 5.1. For non-fulfillment, improper fulfillment of the duties provided for by this instruction - within the limits determined by the labor legislation of the Russian Federation. 5.2.

Error 404 page does not exist

For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation. 5.3. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
The job description was developed in accordance with [name, number and date of the document].

Adjuster of instrumentation and automation

Equipment for industrial television, electronic engraving machines - adjustment. 4. Remote control equipment for non-contact and relay systems - adjustment and adjustment.
5. Ultrasonic industrial equipment and flaw detection of medical equipment, phototelegraphs - adjustment. 6. Blocks on semiconductor devices - adjustment. 7. Blocks, units of complex chemical-thermal and electro-vacuum equipment - adjustment.
8. Vibrostands with an electronic control system - adjustment, verification. 9. Relay protection - adjustment. 10. Machines, automatic, electric and electronic self-recording devices - adjustment and verification.
11.

Attention

Automated washing machines - repair and adjustment of software devices. 12. Open-hearth, hardening, induction furnaces - adjustment of automation schemes.

Oxygen and pyrometric instruments - adjustment and testing. 14. Devices of corrective and programming devices - adjustment.

Instrument fitter: what kind of profession, ranks, training

Info

Industrial gas installations (oxygen, hydrogen and acetylene stations) - adjustment of equipment, automation and circuits. 12. Electrical circuits - oscillography of current and voltage.

Adjuster of instrumentation and automation of the 5th category Characteristics of work. Adjustment of instruments and installations of automatic control of medium complexity with a summing mechanism and remote transmission of readings.

Adjustment, testing and commissioning of blocks of medium complexity and power supply systems for electronic computers and control machines, instruments and information-measuring systems. Checking the electrical parameters of regulated equipment using various instrumentation.
Drawing up layout diagrams for regulation and testing of complex mechanisms, devices, systems.

etc. adjuster of instrumentation and automation (5th category)

Autonomous and complex adjustment of electrical, pneumatic, hydraulic control and protection systems, computer technology, automated control systems with "P" and "I" control law. 7th grade. Characteristics of works. Pre-installation check, autonomous and complex adjustment of complex devices and equipment for automatic control, regulation and control.

Important

Pre-installation check and adjustment of automatic regulators, automatic liquid and gas composition analyzers, electronic equipment, oxygen meters, electronic level gauges, sensors of radiation monitoring systems, equipment containing radioactive substances. Autonomous and complex adjustment of control and protection systems based on non-contact devices.

3.
The adjuster of instruments, equipment and systems for automatic control of regulation and control (the adjuster of instrumentation and automation) (hereinafter referred to as the Employee) refers to workers. 1.2. This job description defines the functional duties, rights and responsibilities of the Employee when performing work in the specialty and directly at the workplace in "" (hereinafter referred to as the Employer).
1.3. The employee is appointed to the position and dismissed from the position by the order of the Employer in accordance with the procedure established by the current labor legislation. 1.4. The employee reports directly. 1.5.

Instrument fitter 5th category job description

Industrial gas installations (oxygen, hydrogen and acetylene stations) - adjustment of equipment, automation and circuits. 3.12. Electrical circuits - oscillography of current and voltage.

3.13. Automation of power supply, pressure and temperature - adjustment and verification. 3.14. Equipment for intra-factory dispatching communication of radio stations and intercoms - adjustment and adjustment. 3.15. Equipment for industrial television, electronic engraving machines - adjustment. 3.16. Telecontrol equipment for non-contact and relay systems - adjustment and adjustment. 3.17. Ultrasonic industrial equipment and flaw detection of medical equipment, phototelegraphs - adjustment. 3.18. Blocks on semiconductor devices - adjustment. 3.19.
Blocks, units of complex chemical-thermal and electro-vacuum equipment - adjustment. 3.20. Vibrostands with an electronic control system - adjustment, verification.
3.21.
Instrumentation and A with a lower category; 5.19 be able to use all laboratory and exemplary instruments, stands necessary for the production of work and follow the rules for their operation; 5.20 take care of tools, exemplary and verification instruments; ;5.22 to consider the tasks related to the repair of the SBS completed after: - the completion of the work will be formalized by the relevant records of the work foreman in the “SBS Maintenance Log”, the passport for the SBS, the form of the gas contamination detector; - the gas contamination detectors are checked in with the appropriate documentation ; - the outfit is completely formalized and closed - admission; - SBS was tested by the commission and act. 5.23 was issued to constantly improve their professional level, study new equipment.

Failure to comply with orders, instructions and instructions of the Employer. 4.4. Violation of safety regulations and labor protection instructions.

Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the Employer and his employees. 4.5. Failure to comply with labor discipline. 5. WORKING CONDITIONS 5.1. The work schedule of the Employee is determined in accordance with the internal labor regulations established by the Employer. 5.2. In connection with the production need, the Employee is obliged to go on business trips (incl.
local value). The job description was developed on the basis of. (name, number and date of the document) Head of the structural unit (initials, surname) (signature) » » d. Agreed: legal service (initials, surname) (signature) » » d.
B) 16 PUE Rules for the installation of electrical installations 17 T-29 Instructions for organizing the safe movement of vehicles and pedestrians on the territory of the JSC at enterprises and organizations MNP20 Regulation on the delimitation of functions for metrological support of production between workshops and divisions of JSC21 Regulation on the industrial safety and labor protection management system in JSC 4 QUALIFICATION REQUIREMENTS: 4.1 The level of necessary professional training of an employee. or be trained at the enterprise by the course method according to the program agreed with Rostekhnadzor.
The adjuster of instrumentation and automation must know: - the principles of establishing the modes of operation of individual devices, instruments and blocks; — principles of regulation of blocks of medium complexity and stabilized power supplies; — principles of coding and decoding in telemechanics systems; — technique for setting up digital tracking systems; - device, purpose and principle of operation of complex mechanisms of radio engineering systems and devices; - methods and methods of electrical, mechanical and complex adjustment of complex devices and the technological sequence of adjustment; - layout of complex schemes with the processing of their elements; - fundamentals of mechanics. 2. PROFESSIONAL DUTIES 6. The adjuster of instrumentation and automation is entrusted with: 6.1. Adjustment of instruments and installations of automatic control of medium complexity with a summing mechanism and remote transmission of readings.

Women's Issues Never do this in church! If you're not sure if you're doing the right thing in church or not, then you're probably not doing the right thing. Here is a list of terrible... Christianity What happens to the body of a person who does not have sex? Sex is almost as basic a need as eating.

At least once you start doing it, you won't stop. Even if you keep...

Mechanic for instrumentation and automation (KIPiA) 2nd category

Characteristics, works.

1. Repair, adjustment, testing and commissioning of simple, magnetoelectric, electromagnetic, opto-mechanical and heat measuring devices and mechanisms.
2. Locksmith processing of parts according to 12 - 14 qualifications.
3. Determining the causes and troubleshooting of simple devices.
4. Installation of simple wiring diagrams.
5. Coiling springs from wire in a cold state, protective lubrication of parts.
6. Repair of devices of medium complexity under the guidance of a more highly qualified locksmith.

Must know:

Device, purpose and principle of operation of repaired devices, mechanisms;
- schemes of simple special adjusting installations;
- basic properties of conductive and insulating materials and methods for measuring resistance in various links of the circuit;
- purpose and rules for the use of the most common universal and special devices and instrumentation;


- grades and types of anti-corrosion oils and greases;
- name and marking of processed materials;
- basics of electrical engineering in the scope of the work performed.

Work examples.

1. Ammeters, voltmeters, pressure gauges, galvanometers - medium repair and adjustment.
2. Carriage scales - processing of various parts.
3. Commercial scales, mobile and stationary (mortise) - replacement and repair of platform flooring and weight holders.
4. Weights trade and conditional - repair and delivery under branding.
5. Details simple to devices - metalwork with threading in through holes.
6. Frames for transformers - manufacturing.
7. Gear wheels with a futor - picking.
8. Cinema and cameras - change of eyepieces, locks, caps, repair of frame counters.
9. Magnetic contactors and starters - medium repair.
10. Technical pressure gauges - assembly.
11. Millivoltmeters - medium repair, verification and delivery after testing.
12. Relay base - template assembly.
13. Instruments - setting to mechanical zero.
14. Trailers, binoculars, spotting scopes - repair and adjustment.
15. Piezoacoustic transducers, electromagnetic sensors - medium repair.
16. Copper conductors for resistances - billet.
17. Regulators, distributors and large relays - repair.
18. Copper and platinum resistance thermometers - assembly and calibration.
19. Contact thermocouples - assembly and adjustment.
20. Clamps of complex configuration - manufacturing.
21. Gears, bushings, mounting rings and other parts - pinning on rollers, drilling and reaming holes for pins.

Mechanic for instrumentation and automation (KIPiA) 3rd category

Job Description.

1. Repair, assembly, verification, adjustment, testing, adjustment, installation and delivery of heat-measuring, electromagnetic, electrodynamic, counting, optical-mechanical, pyrometric, automatic, self-recording and other devices of medium complexity with the removal of circuits.
2. Locksmith processing of parts according to 11 - 12 qualifications with fitting and fine-tuning of parts.
3. Drawing up and installation of circuit diagrams of medium complexity.
4. Coloring of devices.
5. Soldering with various solders (copper, silver, etc.).
6. Heat treatment of parts with their subsequent fine-tuning.
7. Determination of metal hardness with calibrated files.
8. Repair, adjustment and adjustment of particularly complex instruments and apparatus under the guidance of a more highly qualified locksmith.

Must know:

Device, purpose and principle of operation of repaired and adjusted devices and devices;
- state standards for testing and commissioning of individual devices, mechanisms and devices;
- the main properties of metals, alloys and other materials used in the repair;
- electrical properties of conductive and insulating materials;
- methods of heat treatment of parts with subsequent finishing;
- influence of temperatures on measurement accuracy;
- symbols for shut-off, control safety valves in thermal circuits;
- rules for the installation of narrowing devices;
- types of laying of impulse pipelines;
- installation of leveling and separating vessels;
- a system of tolerances and fits, qualifications and roughness parameters.

Work examples.

1. Ammeters, voltmeters, galvanometers, millivoltmeters, pressure gauges, electric meters, gearboxes - overhaul and adjustment.
2. Adding machines and typewriters of all systems - current and medium repairs.
3. Barometers - aneroids - repair and adjustment.
4. Technical scales - repair.
5. Commercial and automobile scales with a rocker indicating device - current and medium repairs, checking hardened steel parts of the scales, bending, grinding prisms, pillows and earrings.
6. Working weights - check on control scales.
7. Hydraulic sensors - pressure testing, repair.
8. Piezoacoustic sensors - overhaul, adjustment.
9. Details simple to devices - threading in blind holes.
10. Cinema and cameras - complete disassembly of shutters, repair of self-timers, setting lenses to focus, correcting apertures, adjusting pick-up coils.
11. Rings, ball holders - manufacturing.
12. Sorting magnets - production with installation on the machine.
13. Tubular pressure gauges - repair.
14. Micrometers with a division value of 0.01 mm - disassembly, fine-tuning of the microscrew, heel planes, nuts, as well as assembly and verification by plane-parallel end measures and interference glasses.
15. Potentiometers - disassembly, cleaning, assembly of the kinematic circuit.
16. Devices for electrical, electromagnetic and electrodynamic systems - overhaul.
17. Prisms - fine-tuning after hardening of simple guides.
18. Flow meters, time relays, mechanical float mechanisms - repair and adjustment.
19. Stereo distance meters, commander's pipes - repair and adjustment.
20. Tachometers - repair.
21. Thermocouples - installation.
22. Traction and pressure gauges - repair.
23. Electric chains - continuity.

Mechanic for instrumentation and automation (KIPiA) 4th category

Job Description.

1. Repair, adjustment, testing, adjustment, installation and commissioning of complex electromagnetic, electrodynamic, heat-measuring, optical-mechanical, counting, automatic, pyrotechnic and other devices with fitting and fine-tuning of parts and assemblies.
2. Adjustment and adjustment of the device of relay protection, electroautomatics, telemechanics.
3. Determination of defects in repaired devices and their elimination.
4. Locksmith processing of parts according to 7 - 10 qualifications and assembly of gear and worm gears.
5. Compilation and installation of complex wiring diagrams.
6. Calculation of the absolute and relative error in the verification and testing of devices.
7. Drawing up defective statements and filling out passports and certificates for devices and machines.

Must know:

Device, principle of operation and methods of adjustment of repaired and adjusted complex devices, mechanisms, devices;
- purpose and methods of adjustment of control and measuring and control and adjustment instruments;
- methods of adjustment and calibration of instruments and apparatus and the rules for taking characteristics during their testing;
- rules for calculating resistances;
- diagrams of complex connections;
- rules for calculating the absolute and relative errors in the verification and testing of devices;
- designations of thermal and electrical circuits and drawings;
- system of tolerances and landings;
- qualifications and parameters of roughness;
- basics of mechanics and electronics in the scope of the work performed.

Work examples.

1. Autoregulators - checking and adjustment on existing equipment.
2. Film projection equipment - replacement of individual components and parts.
3. Adding machines and typewriters of all systems - overhaul and restoration.
4. Accurate analytical scales - repair, adjustment.
5. Scales bunker elevator - current, average and capital repairs, adjustment and check.
6. Commercial and automobile scales with rocker indicating devices - overhaul.
7. Scales for commodity and automobile scales with a dial pointing device - overhaul, medium and current repairs.
8. Scales mortise commodity mobile and stationary - current, average and capital repairs, installation, adjustment, check.
9. Viewfinders - repair, adjustment.
10. Water meters of all systems and all diameters in wells - installation with switching to other diameters, medium repairs.
11. Rectifiers - revision and repair.
12. Self-recording galvanometers and logometers - disassembly and repair.
13. Cinema and photographic equipment - repair of synchronizers; diaphragms of deceleration mechanisms, rangefinder adjustment.
14. Gear wheels - finishing the keyway with a nozzle on the axle.
15. Magnetic contactors, marine starters - medium repair.
16. Clock mechanisms of all kinds of instruments (pressure gauges, traction gauges, etc.) - overhaul with the manufacture of parts and adjustment.
17. Microscopes - repair with fine-tuning of parts and alignment.
18. Pressure gauges and indicators - disassembly, repair, assembly and adjustment.
19. Electric bridges - repair.
20. Horizontal and vertical optimeters - disassembly, repair, assembly and adjustment of quill turbines with the manufacture of caps, springs and tables.
21. Axles with tubes - final processing with fine-tuning.
22. Periscopes - repair and adjustment.
23. Optical and radiation pyrometers - overhaul.
24. Devices of the electromagnetic system - repair with disassembly of the kinematic mechanism and the movable system.
25. Electronic regulating devices - repair.
26. Polarized relay - revision, repair and adjustment.
27. Systems of mobile devices - balancing.
28. Voltage stabilizers - revision and repair.
29. Assembly tables - current repair.
30. Ultrasonic electromagnetic thickness gauges - medium repair.
31. Electric drives of all types - installation and adjustment.

Mechanic for instrumentation and automation (KIPiA) 5th category

Job Description.

1. Repair, adjustment, testing, adjustment, installation, adjustment and delivery of complex heat-measuring, optical-mechanical, electrodynamic, counting, automatic and other devices with an automatic control unit with a summing mechanism and remote transmission of readings.
2. Identification and elimination of defects in the operation of instruments, manufacture of laboratory instruments.
3. Drawing scales, grids and drawing up complex sketches.
4. Recalculation of electrical appliances to other measurement limits.
5. Adjustment and verification of qualifications of all types of thermal and electrical instrumentation, automatic regulators and automatic power supplies.

Must know:

Design features of repaired complex and precise instruments and methods for their adjustment and alignment;
- arrangement of precise measuring instruments;
- causes of defects in the operation of devices and machines, measures to prevent and eliminate them;
- kinematic diagram of self-recording devices of all types;
- rules for the repair, verification and adjustment of complex instruments and automata and the rules for choosing basic surfaces that guarantee the required accuracy.

Work examples.

1. Automatic power supply, pressure and temperature - repair, check and adjustment.
2. Autoregulators and devices - installation, adjustment, inspection to determine defects at the installation site and before repair.
3. Autoregulators and other equipment with electronic and semiconductor circuits - repair and reconstruction.
4. Film projection equipment - disassembly, repair, assembly, adjustment.
5. Carriage scales, automobile scales with rocker dial and pointing instruments - installation, adjustment, check of racks, platform brackets.
6. Goniometers - repair, check, adjustment.
7. Optical glass parts - fine-tuning.
8. Interferometers - repair, check, adjustment.
9. Cinema and cameras - setting the angle of the mirror, correcting the diaphragm block, the barrier.
10. Depth exemplary pressure gauges and potentiometers - repair with scale recalibration.
11. Self-recording and contact pressure gauges - repair.
12. Measuring machines for measuring lengths - repair, check, adjustment.
13. Processing machines of domestic production - assembling units.
14. Universal microscopes - repair, check, adjustment.
15. Instrumental microscopes - repair of the stroke head of the microscope; repair, assembly and checking of the table for accuracy.
16. Electric and electronic bridges - repair.
17. Precision levels - repair, check, adjustment.
18. Axes of arrows of devices - sharpening and polishing.
19. Automatic gas analysis devices, radioactive ultrasonic and radioactive pneumatic regulators, capacitive signaling devices, system blocks, etc. - repair, assembly and adjustment.
20. Oxygen and pyrometric devices - repair, check, adjustment.
21. Complex optical-mechanical devices of various systems and designs - repair, adjustment and testing.
22. Pointer measuring instruments - overhaul with replacement of main parts and assemblies - rewinding of frames, replacement of torque springs with selection of their strength, recalibration of instruments to other measurement limits.
23. Precision instruments (optical pyrometers, analytical, microanalytical balances, etc.) - complete overhaul with a guarantee of service life.
24. Universal devices for checking worm cutters - checking, adjusting.
25. pH meters - repair with complete disassembly and assembly.
26. Flowmeters with a secondary control device - repair.
27. Telecells of the telemechanization system, linear nodes and radio control - repair, assembly, testing and adjustment.
28. One-second theodolites - repair, check, adjustment.
29. Squares and calibration plates, sine rulers - repair and finishing of surfaces.
30. Thermal shields - switching of complex electrical circuits.
31. Eccentrics - finishing the curved surface on the goniometer.

Mechanic for instrumentation and automation (KIPiA) 6th category

Job Description.

1. Repair, adjustment, installation, testing, adjustment, adjustment and calibration of experimental, experimental and unique heat-measuring, automatic and electronic equipment for projection and optical systems, radioactive devices, radio station units, direction finders, radar installations.
2. Identification and elimination of defects in the operation of the equipment.
3. Determination of the degree of wear of parts and assemblies.
4. Adjustment and comprehensive testing after wiring diagrams for thermal control and automation of boilers, turbines and process equipment.
5. Assembling circuits for testing thermal automation devices.

Must know:

The device, the interaction of complex devices, the technological process of their assembly and methods of adjustment;
- electrical thermal diagrams of thermal automation devices;
- device and methods of alignment of complex control and adjustment devices;
- properties of optical glass, metals and auxiliary materials, conductors, semiconductors used in instrumentation;
- basics of calculation of gears of various gearing profiles and optical systems;
- fundamentals of physics, mechanics, telemechanics, heat engineering, electrical engineering, metrology, radio engineering and electronics in the amount of work performed.

Requires secondary vocational education.

Work examples.

1. Autoregulators and heat measuring devices - adjustment on existing equipment.
2. Analyzers of automatic composition of liquids and gases (titrimeters, infrared absorption gas analyzers) - overhaul and adjustment.
3. Film projection devices - adjustment of the Maltese and clamshell systems.
4. Electronic equipment - adjustment.
5. Scales automatic portion - overhaul, installation, adjustment and verification.
6. Scales and weights exemplary - repair, adjustment, verification.
7. Exemplary wagon scales - repair, installation, adjustment and verification.
8. Optical-acoustic gas analyzers - overhaul, adjustment.
9. Rangefinders - repair and adjustment of the optical system.
10. Television meters - repair, check.
11. Cinema and cameras - adjusting shutters, repairing the slowdown mechanism, replacing the rangefinder prism, eliminating backlash in the range camera "Kyiv", "Start", "Change" and repairing the self-timer, eliminating mirror drop, correcting uneven film buckles, setting lenses to focus , cleaning the viewfinder, changing the mirror, adjusting the lens cocking spring.
12. Magnetic oxygen meters - installation and adjustment.
13. Contours of oscillatory telecells of telemechanization systems - repair, adjustment.
14. Comparators - repair, adjustment.
15. Reduction shops, Warren motors - repair and adjustment.
16. Resistance stores - repair.
17. Oscilloscopes - repair.
18. Optical pyrometers, radiation and potentiometers - repair and adjustment.
19. Checkweighing platforms - check.
20. Molds of complex configuration - manufacturing.
21. Salinity alarms - installation, repair, adjustment.
22. Automation schemes for blowing heating surfaces and continuous blowing boilers - repair and adjustment.
23. Wiring and switching diagrams - drawing up according to electrical circuit diagrams.
24. Resistance thermometers - winding the active part and welding the places of separation.
25. Control testers (devices) - repair.
26. Magnetic amplifiers - repair.
27. Selective devices - selection of places, marking and installation according to the concepts of thermal control and auto-regulation.
28. Electronic level gauges - repair and adjustment after installation.

Mechanic for instrumentation and automation (KIPiA) 7th category

Job Description.

1. Repair, maintenance, inspection, testing, installation, adjustment and commissioning of electronic devices based on microprocessors, mini- and micro-computers and terminal devices of the teleprocessing system.
2. Adjustment, adjustment and commissioning of complex systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work on the elements of these systems, programming controllers, micro- and mini-computers and other equipment and electronic computers with output them to the specified operating parameters.
3. Diagnosis of equipment control systems using special test programs.

Must know:

Basic principles of building control systems based on microprocessor technology, functional and block diagrams of programmable controllers, micro- and mini-computers;
- design of microprocessor devices;
- basics of programming and theory of automated electric drive;
- ways of introducing technological and test programs;
- a method for setting up systems in order to obtain the specified static and dynamic characteristics of devices and instruments of converter technology;
- arrangement of the main instrumentation and diagnostic equipment, created on the basis of microprocessor technology;
- methods and organization of building "memory" in control systems.

Requires secondary vocational education.

Work examples.

1. Microprocessor "Intelligent" differential pressure gauges, pressure and level sensors - checking, testing, reconfiguration using communicators.
2. Microprocessor-based gas analyzers, moisture, salinity, quality meters - checking, testing, entering programs, changing ranges, determining faults by tests.

Mechanic for instrumentation and automation 8th category

Job Description.

1. Comprehensive maintenance and adjustment, repair, inspection, testing, installation and commissioning of complex and unique systems of instruments and equipment control systems based on microprocessor technology with the performance of restoration and repair work of these systems, programmable controllers, micro- and mini-computers and other equipment of electronic computers, as well as peripheral equipment.
2. Their diagnosis with the help of test programs and stands with the use of computer technology.
3. Drawing up tests and corrections of technological programs and stands using computer technology.

Must know:

Ways to build control systems based on microprocessor technology;
- schematic diagrams of programmable controllers, micro- and mini-computers;
- ways to correct technological and test programs;
- organization of a complex of works on adjustment and troubleshooting of devices and systems of computer technology;
- device and diagnostics of unique measuring and control systems and complexes;
- theory of automatic control;
- the main "languages" of programming used in specific technological equipment.

Requires secondary vocational education.

Work examples.

1. Microprocessor controllers, regulators - verification, programming, introduction of programs, selection of changes in the characteristics of regulation for each specific control unit.
2. Microprocessor logic circuits - adjustment, verification, fault detection by tests.
3. Microprocessor devices with digital inputs and outputs - checking, programming.
4. Microprocessor-based intelligent sensors for pressure, temperature, level sensors - setting, programming, testing, testing using a communicator using the HART or SMART protocol.
5. Microprocessor controllers, vibrometers - adjustment, programming, repair, delivery for testing.
6. Microprocessor-based level gauges, recorders, paperless recorders (based on a micro-computer), microprocessor-based gas analyzers, pH meters, humidity and temperature meters - connection to a PC, configuration, programming, adjustment, testing, delivery for verification.

Professional standard by profession Instrumentation and control fitter -.

APPROVE:

________________________

[Job title]

________________________

________________________

[Name of company]

________________/[FULL NAME.]/

"____" ____________ 20__

JOB DESCRIPTION

Adjuster of instrumentation and automation of the 6th category

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of the adjuster of instrumentation and automation of the 6th category [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. The adjuster of instrumentation and automation of the 6th category is appointed to the position and dismissed in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The adjuster of instrumentation and automation of the 6th category belongs to the category of workers and reports directly to [position title of the immediate supervisor in the dative case] of the Company.

1.4. Adjuster of instrumentation and automation of the 6th category is responsible for:

• timely and high-quality performance of tasks for their intended purpose;
• compliance with performance and labor discipline;
• observance of labor safety measures, maintenance of order, compliance with fire safety rules at the work site (workplace) entrusted to him.

1.5. A person with a secondary vocational education in this specialty and at least 1 year of work experience is appointed to the position of an adjuster of instrumentation and automation of the 6th category.

1.6. In practice, the adjuster of instrumentation and automation of the 6th category should be guided by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions of the immediate supervisor;
• this job description.

1.7. The adjuster of instrumentation and automation of the 6th category must know:

• assembly technology of equipment blocks of any complexity;
• design, schemes and principles of operation of electronic counters of cash machines, rejection conveyors, counting and summing and computer control machines;
• methods and methods for setting up various electrical units and complex regulators;
• methods for calculating individual elements of control devices;
• rules for registration of delivery technical documentation;
• the basics of telemechanics within the scope of the work performed.

1.8. During the period of temporary absence of the adjuster of instrumentation and automation of the 6th category, his duties are assigned to [name of the position of the deputy].

2. Job responsibilities

The adjuster of instrumentation and automation of the 6th category performs the following labor functions:

2.1. Adjustment, verification and commissioning of complex schemes of industrial automation, telemechanics, communications, electronic-mechanical testing and electro-hydraulic machines and stands equipped with information and measuring systems.

2.2. Adjustment of counting machines with electronic counters and rejection conveyors for checking and counting coins of various denominations.

2.3. Comprehensive testing of an electronic computer control system with a testing machine.

2.4. Adjustment and testing of electronic computer control machines.

2.5. Drawing up schematic and assembly diagrams for adjustment and testing of complex and prototypes of mechanisms, devices, systems.

2.6. Development of adjustment methods and schemes for connecting regulated equipment with instrumentation and power supplies.

2.7. Adjustment and testing of equipment and units of radio stations, direction finders, radar installations and devices for automatic operation of electronic equipment.

In case of official necessity, the adjuster of instrumentation and automation of the 6th category may be involved in the performance of duties overtime, in the manner prescribed by law.

3. Rights

The adjuster of instrumentation and automation of the 6th category has the right to:

3.1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

3.2. Submit proposals for the management to improve the work related to the responsibilities provided for in this job description.

3.3. Report to the immediate supervisor about all the shortcomings in the production activities of the enterprise (its structural divisions) identified in the course of the performance of their duties and make proposals for their elimination.

3.4. Request personally or on behalf of the immediate supervisor from the heads of enterprise departments and specialists information and documents necessary for the performance of their duties.

3.5. Involve specialists from all (individual) structural divisions of the Company in solving the tasks assigned to him (if it is provided for by the regulations on structural divisions, if not, with the permission of the head of the Company).

3.6. Require the management of the enterprise to assist in the performance of their duties and rights.

4. Responsibility and performance evaluation

4.1. The adjuster of instrumentation and automation of the 6th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation - and criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. Evaluation of the work of the adjuster of instrumentation and automation of the 6th category is carried out:

4.2.1. The immediate supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Attestation Commission of the enterprise - periodically, but at least once every two years based on the documented results of the work for the evaluation period.

4.3. The main criterion for evaluating the work of an adjuster of instrumentation and automation of the 6th category is the quality, completeness and timeliness of his performance of the tasks provided for in this instruction.

5. Working conditions

5.1. The mode of operation of the adjuster of instrumentation and automation of the 6th category is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, the adjuster of instrumentation and automation of the 6th category is obliged to go on business trips (including local ones).

Acquainted with the instruction __________ / ____________ / "____" _______ 20__

Characteristics of works. Adjustment of instruments and installations of automatic control of medium complexity with a summing mechanism and remote transmission of readings. Adjustment, testing and commissioning of blocks of medium complexity and power supply systems for electronic computers and control machines, instruments and information-measuring systems. Checking the electrical parameters of regulated equipment using various instrumentation. Drawing up layout diagrams for regulation and testing of complex mechanisms, devices, systems.

Must know: the principles of establishing the modes of operation of individual devices, devices and units; principles of regulation of blocks of medium complexity and stabilized power supplies; principles of coding and decoding in telemechanics systems; technology for setting up digital tracking systems; device, purpose and principle of operation of complex mechanisms of radio engineering systems and devices; methods and methods of electrical, mechanical and complex adjustment of complex devices and the technological sequence of adjustment; prototyping of complex schemes with the processing of their elements; fundamentals of mechanics.

Requires secondary vocational education.

Work examples

1. Automation of power supply, pressure and temperature - adjustment and verification.

2. Equipment for intra-factory dispatching communication of radio stations and intercoms - adjustment and adjustment.

3. Equipment for industrial television, electronic engraving machines - adjustment.

4. Telecontrol equipment for non-contact and relay systems - adjustment and adjustment.

5. Ultrasonic industrial equipment and flaw detection of medical equipment, phototelegraphs - adjustment.

6. Blocks on semiconductor devices - adjustment.

7. Blocks, units of complex chemical-thermal and electro-vacuum equipment - adjustment.

8. Vibrostands with an electronic control system - adjustment, check.

9. Relay protection - adjustment.

10. Machines, automatic, electrical and electronic self-recording devices - adjustment and verification.

11. Automated washing machines - repair and adjustment of software devices.

12. Open-hearth, hardening, induction furnaces - adjustment of automation schemes.

13. Oxygen and pyrometric instruments - adjustment and testing.

14. Devices of corrective and programming devices - adjustment.

15. Radio units - connecting the unit to the mains in a circuit with a power supply, setting the wavelength of the high-frequency part, removing the direct current mode, checking the radio frequency gain.

16. Systems of calculating devices - adjustment.

17. Metal-cutting machines of varying complexity and with program control, equipment for flexible technological processes - adjustment of automation.

18. Television and electronic-mechanical plotters - adjustment.

19. Amplifiers of high and low frequency (two to five stages of amplification) - adjustment with adjustment and adjustment of all parameters of incoming radio tubes, tuning of local oscillator circuits and equalization of the frequency band in band-pass amplifiers and cutoff filters, resonance tuning, removal and plotting frequency characteristics.