Sofa with your own hands. Corner, straight and others (60 step by step photos)

An extra bed in an apartment is always nice. You can relax yourself in the kitchen or on the balcony, as well as attach unexpected guests. But is it worth buying another sofa if there is any doubt that it will fit in the space allotted for it? A do-it-yourself couch will cost much less, and you can make it strictly according to your size. You will learn about the intricacies of work from our article.

Benefits of homemade furniture

Before you make a couch with your own hands, decide what exactly you need. In fact, a homemade bed has three main features:

• extremely simple, but strong and reliable design;
• smooth surface of the required rigidity;
• headboard height is adjustable.

The simpler the design, the fewer elements in it that fail. In addition, even a novice master makes a couch for himself and his loved ones, that is, he tries so that his creation does not collapse at the most inopportune moment, and also ideally matches the interior and tastes of the owners. Otherwise, there is simply no point in getting to work.

Smooth surface

The ideal option is a regular medical couch. It was made in order to make it comfortable for the patient to lie on it. Its most important feature is a flat bed, without depressions and protrusions. It is suitable even for a person who has serious back problems.

Headboard height

You can, of course, make the couch flat - a kind of long trestle bed on a metal or wooden frame. But it’s better if the height of the headboard is adjustable, then on your creation you can sleep, read, and just relax in a half-sitting position.

What to do?

In polyclinics there are metal couches upholstered in leather or leatherette. This is very convenient, since the metal frame can withstand a lot of weight. And the leather coating is easy to care for - it is simply disinfected, blood stains and other dirt are well erased from it. But at home, the battles with germs are far from being as violent as in a medical institution. Therefore, you can take the materials that you like.

A good replacement for the factory iron bed from the emergency room is a do-it-yourself couch made of wood. This traditional material has its advantages:

• you can find rocks, products from which are no worse than steel;
• the tree is not subject to corrosion;
• it is much easier to process, moreover, complex technologies such as welding are not needed;

Choosing a breed

For the frame, you need a beam with a thickness of 60x60 mm. He can be:

• oak;
• beech;
• pine;
• spruce;
• birch;
• from other species, up to boxwood and rosewood.

Important! Beech is most suitable. Oak for the first product is too heavy and too expensive. As for spruce or pine, they are lighter and cheaper, but deform under heavy weight. Birch is a good durable material, but rots faster than other species, so it needs more intensive processing. But in any case, you will need varnish and stain.

Bed

For the bed itself, you will suit:

• Plywood.

Important! The second option is preferable. It is best to choose europlywood 20 mm thick. The quantity depends on the dimensions of the product. A standard sheet has dimensions of 2100x1200 mm, and this is quite enough for a regular-sized couch.

upholstery material

Not only the appearance of your future masterpiece depends on this, but also how comfortable it will lie on it. Foam rubber is usually used for gaskets. Thickness depends on your preferences. If the bed is not particularly soft, a thickness of 2 cm is enough.

Important! Foam rubber has one drawback - it quickly disintegrates. Therefore, you can be smart and pick up something else, like penofol left after the repair, or other fairly soft foam materials.

As for the external coating, then, as they say, options are possible:

• leather;
• leatherette;
• flock;
• tapestry;
• microfiber;
• other dense materials that are resistant to abrasion and able to keep their shape well.

headboard lifting mechanism

This is the most difficult moment. There are two options:

• step locking mechanism;
• gas microlift.

The step locking mechanism has several positions. In a regular furniture store, you are unlikely to find anything suitable, as well as in an online store. But in big cities there are furniture fittings departments, and you can ask there.

Important! Once upon a time, just such a mechanism was used on folding beds, so maybe you don’t have to buy anything - all of a sudden, somewhere in grandfather’s barn, a frame from a canvas folding bed on an aluminum frame was lying around.

The gas microlift is a depreciation device. Its main drawback is that it allows you to set the headboard in just two positions. You need a microlift no longer than 400 mm and with a force of 40 to 80 N.

Important! In the hardware store, you can be offered lifting mechanisms designed for an ottoman or sofa - it’s better to refuse this right away, they are definitely not suitable for your purposes.

Other fittings

Plywood parts and upholstery need to be fixed with something. To make a simple couch, you will also need:

• confirmations 5x70 mm;
• self-tapping screws 4x16 mm;
• self-tapping screws 4x60 mm;
• metal corners 30x30 mm;
• butterfly loops;
• staples for stapler 12 mm;
• emulsion of PVA glue.

Important! You can upholster the bed without a stapler, manually - then you need a hammer and wallpaper nails. It will take much more time.

Instruments

To work, you will need a set of carpentry tools:

• jigsaw;
• wood saws;
• screwdriver;
• drills and bits;
• stapler;
• roulette;
• pencil;
• square;
• sandpaper;
• varnish and paint;
• brushes for varnish and paint.

We make blanks

If the couch is intended for a person who is not all right with his back, it is better to make it higher than a standard sofa. First you need to make blanks:

• legs;
• lodge;
• headboards;
• frame elements.

legs

If you want your product to be tall enough, cut the timber into 50 cm pieces. But, of course, the legs can be longer or shorter. The main thing is that they are exactly the same in length. Otherwise, the height will have to be adjusted already at the finished product, and this is extremely inconvenient.

Bed

It is better to mark a sheet of plywood for the headboard and for the bed immediately. For the bed you need a rectangle 170x70 cm, for the headboard - 38x70 cm.

Important! The dimensions may be different - if, for example, you have a very tall person in your family, a bed a little more than two meters long may not be enough for him. But make sure that the width of the bed and the headboard are the same.

Tsargi

Tsargi are the most important elements of any furniture. In this case, there are six:

• 2 long;
• 4 short.

Both are made from the same plywood. Long ones measure 200x17 cm, short ones - 56x17 cm.

Cooking details

In order for the couch in the hallway to be in its place with your own hands, there is a lot to be done. First you need to process all the details:

1. All wooden parts, except for those on which there will be upholstery, clean and sand with sandpaper.
2. Saturate them with stain to give a beautiful color.
3. Cover the details with furniture varnish.

Important! Lacquer need to cover each detail twice - let the first layer dry, go over the sandpaper again, and then apply the second layer.

Croim foam rubber

Foam rubber is often sold in large sheets - this is exactly what you need. Cut out 2 parts - for the bed and for the headboard.

Important! Be sure to leave enough allowance to fold the pad under the bottom of the bed and headrest. If you don't, the upholstery will be in constant contact with the wood and will wear out quickly.

We upholster a couch

Cut out 2 rectangles - allowances should be such that you can bend the fabric to the back of the product and bend it.

Important! Don't be afraid to leave too much, you can cut off the excess later, although this is not necessary.

We do the work:

1. Nail the long edge of the upholstery to the long side of the couch without stretching.
2. Pull the fabric to the middle of the opposite long side.
3. Nail it in the middle.
4. Gradually stretch and pin towards the corners.
5. Attach the upholstery on the short sides in the same order.
6. Cut off excess at the corners.
7. Do the same for the headrest.

Assembly

When all the details are processed, you can start assembling:

1. Drill holes for 5 mm confirmation screws in the short drawers at the ends.
2. In long drawers, drill the same holes in the planes, diameter - 8 mm.
3. Position the short drawer side at a distance of 40 cm from the headrest attachment point.
4. Assemble the frame.
5. Drill holes in the sides for self-tapping screws with which the legs will be attached - diameter 5 mm.
6. Drill holes with a diameter of 2.5 mm in the legs.
7. Fasten the legs.
8. Screw the corners along the perimeter of the frame - this does not need to be done where the headrest will be.
9. Screw the bed to the corners.
10. Place butterfly loops at the junction of the bed and headboard.
11. Install the headboard height adjuster.

The massage table is a professional furniture for the massage therapist. The comfort of the client and the master himself depends on the quality of this item. Due to the narrow specialization, such a table will not be cheap, so many craftsmen are thinking about how to make a massage table with their own hands.

On the Internet you can find various schemes of expensive and budget options. In this article, I will show you how to build your own folding table without using complicated tools at home.

Required Tools

• Circular saw with an inclined disk. Best suited for sawing timber. Unlike a stationary machine, it can be used in any room.
• Hacksaw for metal. Good for small cuts.
• Drills for wood. These drills are distinguished by a special sharpening that makes it easier to work with wood.
• Screwdriver. Screwdriver tool.
• Mallet. Carpenter's tool for working with wood.
• Chisel. Tool for rough sampling of grooves.
• Wood saw. Suitable for sawing small parts, sawing grooves and grinding ends. Choose a model with fine teeth.
• Jigsaw with guide element. Tool for sawing wood pieces.
• Construction stapler with staples. Useful for covering the countertop with leather or other material.
• Stationery knife.
• Roulette or large ruler.
• Building corner.
• Construction pencil.

Necessary materials

1. Two sheets of sanded plywood measuring 600 x 900 x 9 millimeters.
2. Eighteen meters of timber for legs measuring 20 x 50 millimeters.
3. Two sheets of foam rubber measuring 600 x 900 x 50 millimeters.
4. Leatherette sheet measuring 1100 x 2100 millimeters. If desired, you can use real leather or other material.
5. Piano loops measuring 18 x 50 millimeters, you will need fourteen pieces.
6. Furniture screws 15 mm long.
7. Self-tapping screws 20, 35 and 45 millimeters long.
8. PVA glue, half a liter
9. Sandpaper with 600 grit.

Assembly

1. The scheme for assembling a massage table with your own hands begins with marking the table top. On the prepared plywood, I marked out two elements measuring 600 x 900 millimeters. After that, using a jigsaw, I sawed out the details.

I sanded the ends of the resulting blanks with sandpaper to remove burrs and make them smooth.

In the blank, which will be the front part, a cutout for the face is marked. I sawed an oval hole measuring 180 x 110 millimeters with a jigsaw. The edges were also processed with sandpaper.

1. After making the cover, I took up the frame. From a beam measuring 20 x 50 millimeters, I made four segments of 900 millimeters in length and four segments of 550 millimeters in length.

Using self-tapping screws 45 mm long, the timber must be connected in such a way that two frames 900 x 600 mm in size are obtained, they are measured along the outer ends.

Do not rush with self-tapping screws, before connecting the bars, I made holes in them 3 mm deep. This prevents cracking of the wood. We attach the countertop element to the finished frames. For fixing, we use self-tapping screws 20 millimeters long.

1. Next, I started finishing the top cover. I carefully spread the glue on the countertop, laid a sheet of foam rubber on top. After a while, I repeated the procedure and fixed the second sheet of foam rubber. After the glue had dried, I carefully cut out an oval for the face and removed the excess material around the edges.

The next step is to stretch the leatherette. I carefully secured it to the countertop without compressing the foam too much. He bent the edges of the material and brought it behind the frame, stitching it with a stapler to secure it. The step in the line is 0 millimeters. First, I fixed the material on the long sides, and only then on the short ones.

The hardest part is the corners. The material must be fixed without the formation of folds and irregularities. On the short side, I left small cutouts for the loops.

I assembled the legs as shown in the diagram. The most difficult thing when assembling a massage table with your own hands is to achieve stability and an even cut. The table must not wobble. The cut must be done neatly and precisely. In total, I needed two of these blanks.

I assembled the following supports in a similar way, it also took two of them.

We connect the first pair of supports with the second using self-tapping screws. As a result, I got two identical sets of legs. No distortions are allowed, you need to check this immediately.

On the inner frames of the countertop, I marked the places for the hinges. They are placed right at the corners of the structure. Then I fixed the hinges and tried on the supports for them. To check for folding, you can fasten the hinges to the legs with only one self-tapping screw through the central hole in the hinges.

All major connections should be easy to fold and not jam. This should be taken care of before all the screws are tightened.

1. The final stage involves making a spacer, which will give the portable table more stability.

To do this, two bars 53 centimeters long are connected with a piano loop. After that, I connected the ends of the element with the short part of the table supports. In a stationary position, this part will unfold along with the supports.

Project completed. Such a table is suitable for both professionals and beginners to get involved in this difficult task.

Labor and cost

Sawing parts, assembling and fitting with leather will take three hours.

• A leatherette sheet measuring 1100 x 2100 - 400 rubles.
• Two sheets of sanded plywood measuring 600 x 900 x 9 millimeters - 650 rubles.
• Eighteen meters of timber measuring 20 x 50 millimeters - 300 rubles.
• Two sheets of foam rubber measuring 600 x 900 x 50 millimeters - 2400 rubles.
• Piano loops measuring 18 x 50 millimeters, fourteen pieces - 700 rubles.
• PVA glue, 500 grams - 300 rubles.

The total cost is 4750 rubles.

On such a table it will be convenient to massage the client, besides, folding furniture is easy to carry with you.

The sofa is one of the most necessary attributes of every home. Today, ottomans are increasingly being used as an alternative to such products. This type of furniture is not only practical, but stylish, which allows you to use it as a bed or a regular sofa. To build such furniture is quite simple, but it requires a preliminary choice of design design and minimal skills for such work.

Choosing a material

Modern ottomans and couches are relatively simple designs, which makes it possible to make them yourself. To get high-quality and durable furniture, you should choose the right material for the product. Today, several types of products are used for such work:

1. Laminated chipboard. The material is simple and low cost. You can buy these products in almost any hardware store. The main disadvantages of chipboard are considered low strength, the minimum number of colors. It should also be noted that the structure of the plate contains harmful substances that can be released into the air.
2. Furniture shield. It is made only from natural materials, which reduces the presence of components harmful to humans. Furniture panels in terms of strength can be compared with a solid array. One of the main disadvantages of such a product is its high price, which slows down its distribution to hardware stores.
3. Array. The ottoman of their natural board is strong and durable. If the size of the couch is small, then the array is the best option in terms of price and quality.

Also for the construction of such furniture you will need a lot of auxiliary materials:

1. Wooden beam. With its help, the joining parts are fastened. Sometimes with the help of a bar, horizontal spacers or supporting surfaces are formed.
2. Finishing fabric. There are no universal recommendations here, since you can choose this product to your taste in any specialized store. Very often, flock or chenille is used for this.
3. Filler. As this product, various types of foam rubber or synthetic winterizer are used.
4. Additional accessories. They are used for decorative finishing of the ottoman. This includes special fasteners, threads for sheathing, buttons, etc.

Required Tools

The assembly of the couch is impossible without the use of special mechanisms. To get a reliable design, you should stock up on the following set of tools:

1. Roulette and a simple pencil. They are needed to form even parts.
2. Hacksaw, jigsaw and other similar mechanisms.
3. Screwdriver, screwdrivers.
4. A set of fasteners for connecting individual parts. Various types of metal or plastic corners, self-tapping screws, confirmations, etc. are used as such products. All this depends on the chosen material for the ottoman.

Master class: step by step instructions

Making an ottoman or couch with your own hands involves working with solid wood or its substitutes.

It is important not to rush in order to get smooth details.

This procedure begins with the assembly of the frame. This process consists of several successive stages:

1. First of all, the marking and cutting of boards and wooden canvas is performed. Their size depends on the dimensions of the ottoman itself. Please note that the boards in the simplest designs form a hollow rectangle. The thickness and width of such a workpiece directly affects the strength and height of the furniture itself.
2. After that, a frame of boards is assembled from the obtained elements. For their fixation, metal corners or a wooden bar are used, to which the base is screwed.
3. At this stage, a wooden sheet is screwed to one of the sides of the resulting rectangle. To do this, it is also pre-cut out, then fixed with screws.
4. Then proceed to strengthen the frame. Often this involves screwing several transverse bars. If the size of the ottoman is small, this step may be omitted. When the design is ready, all elements should be carefully sanded. If necessary, legs are screwed to the frame, which will act as a support. Sometimes this part may be completely absent, since the structure is installed on the boards.
5. The process ends with the installation of the headboard, as well as the supporting backrest (if necessary). They are made from wooden boards or plywood. The shape of these elements is selected individually, taking into account the basic design of the room.

Assembling the frame is only half the battle, since the ottoman must be not only durable, but also beautiful. Therefore, it is important to additionally decorate the boards and make the ottoman comfortable.

The decorating process can be divided into the following successive stages:

1. Purchased foam rubber and upholstery fabric. The thickness of the sealant is selected taking into account its density and location on the product itself. If this is a headrest, then you should use a thicker material that can restore shape under prolonged loads.
2. After that, the elements of the ottoman are upholstered with foam rubber. To do this, use a special stapler and staples. When upholstering, it is important to carefully stretch the sheets so that the surface does not form wrinkles. It is advisable to fix the foam rubber only from the inside in order to exclude poor design and the possibility of damage to the upholstery when the fasteners come out unauthorized.
3. Please note that the foam rubber should be fixed only in certain places. You should not do this on the main surface, as the mattress will be located there. If you do not want to use such an attribute, then only special foam rubber should be used to form a soft bed.
4. The process is completed by covering the ottoman with a cloth. To do this, you can use many different materials, among which flock is very common. Upholstery technology is very similar to the installation of foam rubber. To eliminate the presence of a large number of seams, you should use large pieces of fabric that completely cover the entire surface. The material is also fixed with staples. They also need to be placed in visually inaccessible places on the furniture. Often this part is the bottom of the ottoman.

The couch construction technology resembles the previously described algorithm, only different layouts are used.

What is the difference between an ottoman and a bed? It is used for sleeping, as a bed or as a sofa. A do-it-yourself ottoman made can perform any function, the main thing is that it fully satisfies the desires of the owner and fits perfectly into the interior. The difference between an ottoman and a bed is that the design is complemented by a persistent backrest located at the head, along the length or angle.

When making an ottoman with your own hands, the main emphasis is on modeling the frame. Drawings are used to correctly complete the work. To acquire the necessary skills for making this type of furniture with your own hands, it is recommended to try to assemble an experimental version for use, for example, to make a blank from a bed in the country. Gaining experience, it becomes possible to make a beautiful and comfortable design, worthy of the highest praise.

In order to make a durable ottoman-bed with your own hands, you need to pay special attention to the choice of materials and fittings. For example, wooden legs will give it a classic and presentable look, while chrome-plated metal ones will give the design a modern effect.

Preparatory stages

How to make an ottoman? The manufacture of an ottoman consists of three main stages:

1. Frame manufacturing;
2. Stuffing volume with foam rubber;
3. Furniture upholstery.

Before starting production, you need to stock up on all the necessary accessories. To combine the interior and dimensions of the ottoman, a diagram is drawn up. Dimensions directly depend on the size of the purchased mattress, because it is simply impossible to make a high-quality mattress with your own hands. List of materials:

• boards, bars, plywood;
• foam rubber;
• synthetic winterizer;
• the cloth;
• buttons for decoration.

Legs for this type of furniture can be made independently, or you can buy it in specialized stores. There are various shops supplying accessories of domestic and foreign manufacturers. But the choice of fabric for upholstery should be taken seriously. After all, it depends on the color and quality of the fabric how harmoniously, the ottoman will complement the interior of the apartment. The selected fabric should be easy to clean and not deform under mechanical stress.

Assembly process

After purchasing the materials used, you can make an ottoman with your own hands. First, proceed to the formation of the base of the product. First, the side parts of the frame are fastened with the help of confirmations, screws or self-tapping screws. The frame walls should fit snugly against the side parts; for this, the bars of the transverse tie are attached to the end of the frame. The joints of wooden structures for the manufacture of a strong structure are smeared with glue. After assembling the frame, it is carefully inspected and checked for strength and correctness of shape.

The next step is to develop the internal structure of the ottoman. To do this, holes are drilled in the longitudinal boards for self-tapping screws, which are located at a distance of 25 centimeters from each other. These holes serve to fix the stiffeners on which a sheet of chipboard or fiberboard is placed. The stiffeners must be tightly fixed, the strength of the created structure depends on this. A foam layer is lined on top of the plywood. The choice of foam rubber must be approached with all responsibility, since soft foam rubber is squeezed under the weight of a person, and too dense foam is not comfortable for relaxation. Experts recommend using foam rubber with a thickness of more than 30 millimeters.

After lining the foam, proceed to the upholstery. For a snug fit of the fabric to the structure, a construction stapler is used. Most often, durable flock or chenille is used for upholstery. When tensioning the fabric, it is important to observe the degree of tension. Upholstery of the frame is not difficult, and when pulling the fabric over the back of the ottoman, problems can arise, since the shape of the back can be different.

The process of nailing fabric is considered a laborious process, as it requires accuracy and diligence. If for a number of reasons the upholstery is unsuccessful, then you can go the easy way and purchase a new cover made of high-quality material.

In general, the procedure for making an ottoman with your own hands is very exciting, since you can be the master and author of the product. To do this, you will have to collect the necessary information yourself. In addition to the unusual backrest configuration, you can make additional drawers. Sometimes they make an additional tightening of the foam rubber in order to increase the volume of the product. With maximum effort, your ottoman will be no different from a professionally made design.

Advantages of an ottoman

Many consider the ottoman to be not very useful furniture, however, having familiarized themselves with the main ways of using it, the opinion changes. Advantages:

• Various modifications of the designs of this type of furniture are an interior decoration (bed, couch, sofa);
• A do-it-yourself ottoman meets all environmental requirements;
• Do-it-yourself furniture is a profitable option in terms of prices;
• This type of furniture is a godsend for small apartments, as it saves space.

Today, the ottoman is regaining popularity and is successfully located in our apartments. Making this type of furniture in this way is equivalent to making a bed with your own hands.

Many pieces of furniture allow a person to take the most comfortable body position for him, suggesting rest from physical overwork. One of the most common is the sofa. There are a lot of types of this option of upholstered furniture. One of the oldest, which appeared in ancient times in the east, is the ottoman. It is a small soft couch that does not have armrests.

In a modern small-sized dwelling, an ottoman allows you to get not only a comfortable bed, but also additional storage space for pillows and bedding. In addition, such a product will be indispensable when organizing an interior in an ethnic style. If the need arises for this type of sofa, we bring to your attention a master class on the independent production of an ottoman from improvised materials.

Since the ottoman combines not only a comfortable place to relax, but also a container for storing soft equipment, for its manufacture you will need to prepare a sufficient number of different materials and tools.

List of materials for a homemade ottoman

The base of the product will be made of coniferous or hardwood boards. You will need:

• board with a section of 2 × 6 inches, 72” long;
• board 2"x4" 72" long;
• 4 boards 2”x6” 24” long;
• 3 boards 2”x4” 22” long;
• 2 boards 2”x10” 72” long;
• 3 boards 2”x10” 27” long;
• 2 bars 2"x2" 65" long;
• 2 bars 2"x2" 281/2" long;
• 4 bars 4"x4" 5" long;
• 2 sheets of 6mm plywood or OSB;
• 1 sheet of 12mm plywood or OSB;
• foam rubber sheet 100 mm thick;
• sackcloth;
• dense upholstery fabric;
• several meters of rolled synthetic winterizer 15 millimeters thick.

In addition to the indicated materials for assembling the product with your own hands, prepare a sufficient number of wood screws with a length of 50 and 75 millimeters, as well as a length of 20 millimeters for attaching plywood. In addition, you will need carpentry glue, staples for a stapler.

Of the tools, it is worth preparing a tape measure, a pencil, a square, a miter saw, a drill, a screwdriver, a construction stapler, scissors.

Making the back of an ottoman

We begin the manufacture of the product with the installation of the back. To do this, we cut boards 2 "x6" 24 "long in the upper part obliquely according to preliminary marking, stepping back 8" from the end of the part. Then, to the ends of the obtained elements with seventy-five-millimeter self-tapping screws, we attach boards with a length of 72 "with a width of 4" and 6, respectively, from above and below. Between them, you need to install boards with a length of 22” when assembling. As a result of the work, the back should take on the following form:

The next step is plywood upholstery. To do this, focusing on the obtained dimensions of the structure, mark and cut out the necessary details, which are attached to the base boards using short self-tapping screws. On the front side, it is not worth sheathing the lower part, since an ottoman bed will be attached to it.

After that, it is necessary to lay and fix the synthetic winterizer on the plywood. For these purposes, you can use glue, having previously lubricated the surface of the plywood with it.

Having cut out two pieces of artificial soft material according to the size of the ends of the back, stick them on the sides of the back.

Making the base of the ottoman

After that, you can start making the bed of the ottoman. To do this, it is necessary to make a box from boards 2 "x10" with a length of 72" and 27", respectively. Using a drill, drill two through holes in the long parts at the location of the screws and wrap them in the end of the short ones. For maximum assembly strength, use the longest screws prepared previously. One of the sides of the resulting frame must be sheathed with plywood. To do this, cut a rectangle with the required dimensions from the sheet and attach it using self-tapping screws 20 millimeters long.

To give decorative properties during the subsequent upholstery of the ottoman with a fabric, also paste over the front and side panels of the box with pre-cut parts from synthetic winterizer.

To install the ottoman on the floor, it is necessary to make a base by connecting the bars with a section of 2 "x2" to each other. In the corners of the resulting frame, fasten short bars 4 "x4", which will play the role of small legs of a homemade sofa.

Alternately attach the backrest and the box to the resulting frame with legs. For these purposes, you can use the average of the prepared screws. Do not forget to connect the box and the back to each other, giving the entire product the necessary strength.

For the convenience of using the storage space, we will make the seat of our homemade ottoman reclining by connecting it pivotally to the box. To do this, we use sheet wood material with a thickness of 12 millimeters. Saw out a rectangle from it according to the size of the box and secure with two hinged loops. Check for correct installation. Check the operation of the box cover by opening and closing it several times. After that, grease the surface of the plywood part with glue and lay the foam rubber cut to size on it.

To perform upholstery work, you will need a dense fabric that has high abrasion resistance and, as a result, a long service life. Depending on the color shades prevailing in the interior, select the pattern and color of the upholstery. Before starting work, it is necessary to mark and cut out the details. For attaching fabric to wooden bases, it is convenient to use a furniture stapler with staples 6-10 millimeters long.

Try to install the staples from the bottom or inside of the ottoman. When upholstered with fabric, pull it up to prevent wrinkling. At the end of the work, your new product will look like this, shown in the figure above.

Dear readers, comment on the article, ask questions, subscribe to new publications - we are interested in your opinion :)